... that maximize the probability of observation of sample values. (corresponding author: gokalp.cinarer@gmail.com) 02 12 2020 21 05 2021 ICE Publishing: All rights reserved 2021 computational studies imaging processing b_k regression coefficients...

...Mayank Agarwal; Rajeev Srivastava Modification of aluminum (Al)-based components with low porosity is a basic requirement of aluminum industries for various applications. Furthermore, porosity and surface cracking are the most common problems with the components produced by the casting process...

...Jiquan Li, PhD; Taidong Li, MSc; Fuyu Xu, MSc; Shaofei Jiang, PhD The appearance quality of plastic parts in weld lines can be improved significantly through the rapid heating cycle molding (RHCM) process. However, there is no evaluation method for measuring the appearance quality of weld lines...

... was emitted onto the test subject, the reflected light was directed to the camera and the images were then captured through a linear scanning process. The three-dimensional (3D) coordinates of the measurement area were then obtained after image processing and coordinate transformation, and multiple surface...

... pressure exceeds the dynamic yield strength of the material, plastic deformation is produced in the shocked region, 14 as shown in the literature. 15 To prevent any melting of the treated surface, coating was adopted in the μLSP. Thus, μLSP represents cold working of the mechanical process rather than...

... are now affording direct interrogation of opaque materials during synthesis and processing. In this work, synchrotron X-ray radiography and tomography were performed at Argonne National Laboratory’s Advanced Photon Source to monitor metallic alloys during melting and solidification. X-ray radiographs...