...Erkan Bahçe; Derya Karaman Metal-on-polyethylene (MoP) hip replacements with a CoCrMo alloy femoral head and an ultrahigh-molecular-weight polyethylene (UHMWPE) acetabular cup are strongly preferred due to their high clinical success. Despite this success, the wear of the bearing surfaces...

... detection and system stability over time. Although computer vision has been historically the most commonly applied method in this context, novel approaches such as deep learning have recently become more frequent and are used in cases where traditional methods cannot be applied. Because of the surface...

... (a = 0.5 mm) parameters, on the processability of Inconel X-750, hence on the surface integrity. In this context, the results obtained from the tests have been comparatively examined through surface roughness, tool wear and chip formation. Comparison results show that the cryogenic carbon dioxide method...

... to measure the film fracture toughness. The properties of the film such as surface morphology and phase composition were compared with those of a film prepared without using the ultrasonic technology, and the toughening factors were analyzed and a calculation model of fracture mechanics was established...

...Padmaker Pandey, MSc; Anamika Pandey, MSc; Nikhil K. Shukla, PhD The rule that governs surface reactions provides very important information for fundamental studies in chemistry and biochemistry. The potential to define the chemical and physical properties of solid surfaces is decisive for chemical...

... of surface properties of ceramic particles. In this study, deposition of nickel–phosphorus (Ni-P) and nickel–boron (Ni-B) layer on SiC particles by way of autocatalytic plating in hypophosphite and borohydride baths was investigated. SiC powders were sensitised and activated respectively in order to ensure...