...Manish Kumar Gupta, PhD Copper high-impact analysis is critical for understanding characterization at dynamic strain rates. The dynamic behaviour of any material is influenced by numerous components of a split Hopkinson pressure bar (SHPB), such as striker forms, striker speed, striker length, bar...

... velocities, and fluctuates around a level under dynamic mode. 18 06 2021 12 06 2023 Emerald Publishing Limited: All rights reserved 2023 computational mechanics deformation dynamics finite-element modelling As important two-dimensional (2D) lightweight cellular materials...

.../parameters beyond the full control of the investigator. Some useful comments and conclusions are drawn. 25 07 2018 07 10 2019 ICE Publishing: All rights reserved 2019 concrete structures dynamics mathematical modelling Beams and other structural components/elements...

... and Kim, 2017 ; Ren et al., 2018 ; Saxena et al., 2016) and have been shown to exhibit unique mechanical properties under static loading (Lim, 2017b) and under dynamic conditions as reported by Chen and Lakes (1996) , Ruzzene and Scarpa (2003) , Scarpa and Malischewsky (2008...

...Reza Mahmoudi, MSc; Hosein Ghaffarzadeh, PhD; Elshan Ahani, MSc; Javad Katebi, PhD In this paper, the sliding mode control (SMC) method, one of the most efficient algorithms in the mitigation of excessive vibrations, was designed to reduce the dynamic responses of dynamical systems. Direct...

... formulae proposed to date is performed, where the formulae are classified according to the formulation methods. 29 09 2017 26 02 2019 ICE Publishing: All rights reserved 2019 buildings, structures & design dynamics failure Analysis of extensive air blast tests conducted...

... rights reserved 2019 buildings, structures & design dynamics seismic engineering Table 1. Cone model and lumped parameters Motion Horizontal Vertical Rocking Torsional Equivalent radius r₀ A 0 π...

... adjacent to the affected structure, resulting in high cable tensions that induce large unbalanced transverse and longitudinal loads on these supports. Because all conductor phases and shield wires are affected, the structures next to the failed support are drastically overloaded. The dynamic effects...

...., 2007). The general equation for the Johnson and Cook (1985) model is presented as composite structures dynamics steel structures In today's built environment, strengthening of existing steel structures is often necessary to extend its service life. The need for strengthening may...

...Ian P. Ward, BSc, MSc, CEng, FIMechE, MInstP A key requirement of offshore wind turbine foundations is that the fundamental frequency of the structure should lie within the required range stipulated by the turbine supplier. If this is not achieved then excessive turbine-induced dynamic stresses...

... characteristics of FG Lévy plates has been investigated. New results of eigenfrequencies and their corresponding three-dimensional mode shapes are incorporated here after performing the test of convergence and validation of present results with the available literature in special cases. dynamics foundations...

... represent a power. The operator indicating partial derivation of dependent variable(s) or function(s) with respect to i is ∂_i. The repetition of indexes never means summation. dynamics geotechnical engineering seismic engineering...

... mechanics dynamics seismic engineering A system matrix C damping matrix c wave speed c_p P-wave speed c_s S-wave speed E Young's modulus E _θ matrix relating boundary velocities...

.... 15 3 2013 10 5 2012 ICE Publishing: All rights reserved 2014 blast concrete structures dynamics A_g cross-sectional area of column B column breadth D column depth EI flexural stiffness f_ck...

..., the majority of empirical methods of predicting blast loads for high explosives are based on the scaled distance curves. 01 10 2012 06 6 2012 ICE Publishing: All rights reserved 2013 computational mechanics design methods & aids dynamics i_r...

... plates subjected to cleared and non-cleared blast loads. These were compared with predictions from explicit dynamic finite-element and single-degree-of-freedom models, in which the blast loading was derived by applying a simple correction to the empirical blast prediction method. The results presented...

... outwards once the rebound velocity peaks. 29 5 2013 16 4 2013 ICE Publishing: All rights reserved 2013 dynamics engineering mechanics safety & hazards Initial analyses of glass breakage were undertaken in World War II. Rough correlations were obtained of charge...

... improvised explosive device. The structure includes a protective slab designed to provide a barrier between the blast load and a densely occupied commercial floor. The blast load derivation was carried out using commercially available computational fluid dynamics (CFD) (hydrocode) software to predict shock...

... modelling team, to predict material behaviour and to derive a scalable locally won fill model for use in any situation. 10 6 2013 22 5 2013 ICE Publishing: All rights reserved 2013 dynamics mathematical modelling For many years, a significant proportion of work conducted...

..., using dynamic finite-element analysis to look at blast effects on a wide range of structures. 17 7 2013 13 5 2013 ICE Publishing: All rights reserved 2013 buildings, structures & design computational mechanics dynamics The threat to public and employee safety from...