This briefing discusses the current challenges to the deployment of straw bale walling systems in the UK. A short historical context is described and the major areas of scientific interest are discussed. These areas include the environmental, thermal, acoustic, structural and durability performance of straw bale walling systems in relation to their properties. Current values and measurements of these properties are discussed along with a short introduction to the major researchers and institutions researching the design and attributes of straw bale walls. The briefing concludes that the evolution of straw bale walling systems is rapidly developing and can, when appropriate solutions to potential risk issues are used, provide the basis for comfortable and sustainable buildings.
Article navigation
December 2010
Review Article|
December 01 2010
Briefing: Challenges related to straw bale construction Available to Purchase
S. Goodhew, MSc PhD;
S. Goodhew, MSc PhD
1
Sustainable Technologies Group, Nottingham Trent University
UK
Search for other works by this author on:
J. Carfrae, BA;
J. Carfrae, BA
2
Environmental Building Group, University of Plymouth
UK
Search for other works by this author on:
P. De Wilde, MSc PhD
P. De Wilde, MSc PhD
3
Environmental Building Group, University of Plymouth
UK
Search for other works by this author on:
Publisher: Emerald Publishing
Received:
February 20 2009
Accepted:
April 19 2010
Online ISSN: 1751-7680
Print ISSN: 1478-4629
© 2010 The authors and the Institution of Civil Engineers
2010
Proceedings of the Institution of Civil Engineers - Engineering Sustainability (2010) 163 (4): 185–189.
Article history
Received:
February 20 2009
Accepted:
April 19 2010
Citation
Goodhew S, Carfrae J, De Wilde P (2010), "Briefing: Challenges related to straw bale construction". Proceedings of the Institution of Civil Engineers - Engineering Sustainability, Vol. 163 No. 4 pp. 185–189, doi: https://doi.org/10.1680/ensu.2010.163.4.185
Download citation file:
Suggested Reading
Scaled-up commercial production of reactive magnesia cement pressed masonry units. Part II: Performance
Proceedings of the Institution of Civil Engineers - Construction Materials (May,2012)
Strength performance of fly ash and slag mixtures using gypsum
Proceedings of the Institution of Civil Engineers - Construction Materials (November,2012)
Sustainable masonry mortar for brick joint and plaster in the UK
Proceedings of the Institution of Civil Engineers - Construction Materials (May,2010)
First International Conference on Rammed Earth Construction: report
Proceedings of the Institution of Civil Engineers - Construction Materials (September,2015)
Using ground granulated blast-furnace slag and mineral wastes to reduce cement in paving block
Proceedings of the Institution of Civil Engineers - Construction Materials (April,2014)
Related Chapters
Iterative and Integrated Design and Delivery Process
Intelligent Buildings and Infrastructure with Sustainable and Social Values
Biomimetic Architecture: Exploring Adaptive Facades Inspired by Nature
Intelligent Buildings and Infrastructure with Sustainable and Social Values
Sustainability Rhetoric in Modern Times
Achieving Net Zero: Challenges and Opportunities
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
