... that could have appeared to influence the work reported in this paper. 11 05 2025 16 09 2025 © 2025 Emerald Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only cone penetration test deep learning methods geology in situ testing LSTM neural...

... level relevant to a particular problem. This point will be addressed later. 08 09 2023 12 12 2023 Emerald Publishing Limited: All rights reserved 2025 clay geophysics in situ testing lab testing shear wave velocity site characterisation The main objective...

... and the likely in-use degradation of the platform, a plate load test cannot be used in isolation to prove a bearing capacity or factor of safety. This is especially true where the critical input parameter for platform strength, ϕ′, is an assumed and untested value. bearing capacity in situ testing...

... et al. (2005) and O'Brien and Farooq (2012) , respectively. 21 12 2022 13 03 2023 Emerald Publishing Limited: All rights reserved 2024 ground movements in situ testing laboratory testing limit state design/analysis stiffness The stress–strain behaviour...

.... finite element method in situ testing numerical modelling site investigation stiffness UN SDG 11: sustainable cities and communities The shear wave velocity (V_{s) profile of soil is an important parameter in earthquake engineering. It is needed to study site characterisation, site}...

... Terzaghi et al. (1996)). COV, coefficient of variation; SEY, standard error of the Y estimator clay plasticity index cone penetration test effective stress friction angle geomaterial characterisation in situ testing laboratory tests The effective stress friction angle (ϕ...

... from simple laboratory tests. Below this load, the residual soil presented a rigid behaviour even when subjected to cyclic loads. 16 07 2021 09 05 2022 Emerald Publishing Limited: All rights reserved 2022 full-scale tests in situ testing laboratory tests repeated loading...

...′_Ex and N′_Ey are: 01 06 2021 11 04 2022 Emerald Publishing Limited: All rights reserved 2022 excavation H-shaped steel in situ testing stiffness strut A schematic representation of the calculation...

... this criterion; the ones that did not occurred in dense ground where the cavity expansion pressure reached the limits of the equipment before the desired strain target. earth pressure in situ testing tailings Tailings facilities have been assessed for their potential to fail by liquefaction...