... the effect of density on G max more accurately: 6 K = E / ( 3 ( 1 − 2 ν ) ) where E is Young's modulus. 30 03 2021 20 12 2021 ICE Publishing: All rights reserved 2022 dynamics mining & quarrying solid mechanics Tailings...

... water content and matric suction was observed. 12 07 2021 24 12 2021 Emerald Publishing Limited: All rights reserved 2022 effective stress experimental comparison geotechnical engineering micromechanical model partial saturation shear strength solid mechanics soil suction...

... & highways solid mechanics strength & testing of materials structure of soils Increased socioeconomic development, the need for investments in highway infrastructures and declining supplies of appropriate raw materials are evident. As a result, there is a need for careful mechanical...

...: All rights reserved 2020 failure retaining walls solid mechanics Masonry retaining walls, either dry joint or mortared, are commonly observed all around the world in varying scales and applications, such as residential construction, highways, bridge embankments and agricultural...

..., the first arrival time and the travel distance of the bender element system can be found elsewhere (Kang et al., 2014a). geotechnical engineering granular materials solid mechanics In geotechnical engineering, the coefficient of lateral earth pressure of geomaterials at rest...

...: All rights reserved 2018 failure solid mechanics tunnels & tunnelling Circular and rectangular tunnels are widely used in tunnel engineering for subways, city infrastructure and other applications, and many studies in the literature have focused on their stability analysis using...

... 16 05 2018 ICE Publishing: All rights reserved 2018 piles & piling solid mechanics thermal effects Ground source heat pump (GSHP) technology uses geothermal energy for space heating and cooling in the domestic and commercial market, which is currently dominated by the use...

.... granular materials solid mechanics strength & testing of materials The friction angle for anisotropic sand typically varies between 2 and 10° with the major principal stress direction and this corresponds to shear strength variations of 10–60% (Nakata et al., 1998 ; Shibuya, 1985...