...A. Moncada; I. P. Damians; S. Olivella; R. J. Bathurst The paper is focused on sustainability assessment of idealized geosynthetic reinforced soil walls constructed with polyester reinforcement layers using the MIVES multi-criteria decision-making methodology. Sustainability assessments cover...

... are discussed. 04 05 2024 22 05 2024 Emerald Publishing Limited 2025 Emerald Publishing Limited Published with permission by Emerald Publishing Limited under the CC-BY 4.0 license. (http://creativecommons.org/licenses/by/4.0/) Geosynthetics Reinforced soil walls The state of the art...

... length. The models investigated in this study are useful for pullout limit state calculations using both deterministic and reliability-based analysis and design approaches. Geosynthetics Polyester (PET) strap Mechanically stabilized earth (MSE) walls Pullout capacity Reinforced soil walls...

...Y. Miyata; R. J. Bathurst; H. Miyatake ABSTRACT: This paper reports the results of three 4 m high full-scale instrumented geogrid-reinforced soil walls constructed with different structural facings having a range of stiffness. The walls were seated on a 2 m deep foundation layer that was laterally...

... pictures of the backfill used to construct the two GRS walls of Mt. Fuji Shizuoka Airport (modified from Fujita et al. 2007 ; Takagi et al., 2007) Geosynthetics Creep Elasto-viscoplastic property Geogrid Reinforced soil walls Full-scale behaviour Rate effect...

...G. V. Narasimha Reddy; D. Choudhury; M. R. Madhav; E. Saibaba Reddy Numerous pseudo-static methods are available for assessing the seismic stability of reinforced soil walls. These methods consider the dynamic effects of earthquake loading by adding a pseudo-static seismic earth pressure component...

...R. J. Bathurst; Y. Miyata; A. Nernheim; A. M. Allen The K-stiffness Method is an empirically-developed working stress method used to compute reinforcement loads for the internal stability design of geosynthetic-reinforced soil walls under serviceability conditions. In this paper, additional data...

... was compacted using a mechanical tamper. Figure 2. Photograph of wood lagging board supports used during construction 13 02 2006 11 12 2006 16 01 2007 © 2007 Thomas Telford Ltd 2007 Geosynthetics Reinforced soil walls Geotextile Cohesive soils K-stiffness method...

...E.M. Palmeira; R.C. Gomes This paper presents comparisons of predicted stability analyses to measured and observed results of model reinforced soil walls using theoretical design methods. The model walls were failed under a footing surcharge at different locations on the fill surface...