... in this study. 01 09 2025 04 03 2026 © 2026 Emerald Publishing Limited 2026 Emerald Publishing Limited Licensed re-use rights only hydrogen storage permeability & pore-related properties poromechanics relative permeability Rocks/Rock mechanics Skempton’s B...

... with similar parameters (length, diameter, material, etc.) 15 04 2023 29 08 2023 Emerald Publishing Limited: All rights reserved 2023 geotechnical engineering grouting rocks/rock mechanics With the depletion of shallow coal resources, coal mines in China have gradually...

... permeability & pore-related properties rocks/rock mechanics The decrease in the permeability of rocks around production wells during their operation is a common problem leading to a decrease in well flow rates and a production rate of a whole oil field. To restore the rock permeability, engineers...

.... (1992). Genesis of magnetic anomalies over the self-combustion district of the coal field . Geophys. Geochem. Explor.   2 , 98 – 106 . ICE Publishing: all rights reserved 2023 environmental engineering geophysics rocks/rock mechanics temperature effects Globally, baked...

... ′ 3 − σ ′ 1 2 22 09 2021 07 10 2022 ICE Publishing: all rights reserved 2022 failure rocks/rock mechanics shear strength The Hoek–Brown (HB) strength criterion is the most widely used empirical criterion for intact rocks and jointed rock masses...

... breaking in the development of underground space. 09 03 2022 25 07 2022 ICE Publishing: all rights reserved 2022 dynamics laboratory tests particle crushing/crushability rocks/rock mechanics Rock dynamic fragmentation is widely encountered in the excavation and development...

... is similar to that of the Iddefjord granite; that is, the strength has an ultimate value at a certain σ₂. ICE Publishing: all rights reserved 2022 compressive strength laboratory tests rocks/rock mechanics Single-stage conventional triaxial compression (CTC...

... in the axial direction. Uniaxial stress up to 30 MPa was applied without damaging the samples. Details of the material, method and experimental protocol can be found in Zhubayev et al. (2016). ICE Publishing: all rights reserved 2021 Anisotropy Discrete-element modelling Rocks/rock...

.... σ_c = σ₃ = 0). In these tests, the axial stresses were simply the major principal stresses (σ_{1). corrosion microscopy rocks/rock mechanics Table 3. Results of microstructural damage analysis Sample ID pH Duration: days}...

...), and most bolts fail due to the shearing of the rock mass (Srivastava & Singh, 2015). anchors & anchorages failure rocks/rock mechanics ICE Publishing: all rights reserved 2021 03 06 2021 12 07 2021 A uniaxial compression test on intact granite is shown in Fig. 2...

... work is properly cited. geophysics rocks/rock mechanics temperature effects High-temperature gradients drive mechanisms of degradation and weakening of rocks, thus controlling a number of geological processes, engineering applications and cultural heritage (Vagnon et al., 2019...

... functions are proposed to predict the variations in peak SRI and peak shear displacement for multi-joint samples during shearing under CNS boundary conditions. 23 12 2019 17 02 2021 22 02 2021 ICE Publishing: all rights reserved 2021 failure geology rocks/rock mechanics...

... 2021 25 01 2021 ICE Publishing: all rights reserved 2021 discrete-element modelling mineralogy rocks/rock mechanics Flaws with different inclination angles, length and width are widely existing in heterogeneous rocks, which contain mineral grains with different size...

... with the numerical calculation results and considering the actual operation of sample processing factors, the central FBDS platform angle was selected as 2 α = 20 ° , and the corresponding correction coefficient was calculated to be 0·95. laboratory tests rocks/rock mechanics temperature effects...

...). Figure 4 compares the shear strength and dilation under different bolting conditions. 10 03 2020 13 08 2020 21 10 2020 ICE Publishing: all rights reserved 2020 anchors & anchorages failure rocks/rock mechanics Joints in rock mass are always not isolated...

.... Snapshots a ∼ l correspond to the marked moments on the stress−time curve ICE Publishing: all rights reserved 2020 dynamics laboratory tests rocks/rock mechanics The dynamic tensile stress−strain behaviour can provide rich information on predicting the instability and failure...

... improves the residual strength of the fractured rock skin. The variation in the residual strength may depend on fracture formation within the substrate skin. 26 07 2019 18 08 2020 27 08 2020 ICE Publishing: all rights reserved 2020 deformation laboratory tests rocks/rock...

... rights reserved 2020 compaction numerical modelling rocks/rock mechanics When porous materials are deformed at relatively high confining pressure they may develop compaction bands perpendicular to the maximum compressive stress (Holcomb et al., 2007 ; Wong & Baud, 2012...

... adsorption is related to the solvation pressure and the measured elastic weakening during humidification is correlated with the clay minerals sensitivity. clays elasticity rocks/rock mechanics Monumental stone suffers from environmental conditions, especially from water saturation and moisture...

... U o = ∫ 0 ε u σ i d ε i 4 U e = ∫ ε o ε u σ i d ε i 29 07 2019 26 05 2020 27 05 2020 ICE Publishing: all rights reserved 2020 dynamics laboratory tests rocks/rock mechanics...