Numerical simulation of underground excavations in an indurated clay using non-local regularisation. Part 2: sensitivity analysis

A sensitivity study is presented to evaluate the influence of different parameters on the simulation of an underground excavation in the Callovo-Oxfordian (COx) argillaceous formation performed in the Meuse/Haute-Marne underground research laboratory. An elasto-viscoplastic constitutive law representing the characteristic behaviour of indurated mudrocks and stiff clays has been employed. It incorporates anisotropy, strain-softening, creep deformations and dependence of permeability on damage. In addition, a non-local formulation, able to simulate localised deformations objectively, has been incorporated in the analyses. The following features affecting the excavation have been studied: initial stress, strength and stiffness anisotropy, strength parameters, hydraulic and hydromechanical parameters, and scale effects. A simulation reported in a companion paper provides the base case for benchmarking. The results are compared in terms of extent and configuration of the excavation fractured zone, vertical and horizontal tunnel convergences, and the development and evolution of pore pressures in the rock. From the comparisons, an enhanced understanding of the hydromechanical mechanisms associated with underground excavations in COx claystone, and other similar argillaceous materials, has been achieved.