Synopsis
The Albion Mill was built near Blackfriars Bridge, London, in the years 1783–86. This Paper gives details of the structure and its foundations, and a summary of its history, based on original letters and drawings. A short biography is also given of the designer and builder, Samuel Wyatt.
The mill was seven storeys high, founded on a raft 160 × 120 ft in plan resting on the Thames alluvium at an average depth of about 9 ft below ground level. The weight of excavated earth amounted to approximately 50% of the gross foundation pressure (c. 1·0 ton/sq. ft). This is an important and early example of a partially buoyant raft foundation.
Le Albion Mill fut bâti près du pont Blackfriars, à Londres, en 1783–86. Des détails sont donnés de la structure et de ses fondations, ainsi qu'un résumé de son histoire, basé sur la correspondance et les dessins originaux. Une biographie succincte est aussi donnée de l'architecte et constructeur, Samuel Wyatt.
Le moulin avait sept étages et était fondé sur un radier général, mesurant 49 × 36 m en plan, posé sur les alluvions de la Tamise à une profondeur moyenne d'environ 2·8 m en-dessous du niveau du sol. Le poids des terrains excavés constituait à peu près 50% de la pression totale de la fondation (c. 1·1 kg/cm2). Ceci est une application importante et précoce du principe hydrostatique aux travaux de fondation.
