... to the terms of the CC BY 4.0 licence. bearing capacity footings/foundations models (physical) shallow foundations suction Every beachgoer quickly discovers where to walk on a beach. If a path is chosen too high up the beach, the sand is dry, and foot pressure results in large and tiring...

... H s D tan ⁡ Ψ E 11 07 2021 04 08 2021 © 2022 Thomas Telford Ltd 2022 Bayesian back-analysis footings/foundations in situ testing Markov chain Monte Carlo offshore engineering penetrometers punch-through sand-over-clay site investigation...

... the advantage that it can be integrated into the structural analyses of jack-up platforms required for site-specific assessments. © 2021 Thomas Telford Ltd 2021 bearing capacity centrifuge modelling footings/foundations offshore engineering soil/structure interaction Mobile jack-up platforms...

...-collapse cases tested, whereas the upper soil nails needed to be sufficiently extended to contribute properly to the seismic stability of the wall. 13 06 2021 12 11 2021 © 2021 Emerald Publishing Limited: All rights reserved 2021 centrifuge modelling footings/foundations...

... centrifuge modelling earthquakes erosion footings/foundations soil/structure interaction The localised loss of support caused by scouring around bridge piers is one of the main causes of bridge failure (Ballio et al., 1998 ; Melville & Coleman, 2000). Wardhana & Hadipriono...

... Telford Ltd 2021 bearing capacity centrifuge modelling earthquakes footings/foundations partial saturation soil/structure interaction Recent studies on the response and implementation of rocking foundations have indicated that the foundation theoretical ultimate moment capacity, M...

... stresses (σ_x, σ_z and τ_{xz) can be substituted by introducing new variables (σe} and θ). 11 10 2020 23 03 2021 © 2021 Thomas Telford Ltd 2021 footings/foundations limit state design...

... 2 constitutive relations finite-element modelling footings/foundations offshore engineering repeated loading Regarding the fourth criterion (d), it is of special interest to avoid, in the long term, excessive accumulation of rotation/deflection under repeated loading...

... earthquakes finite-element modelling footings/foundations slopes stress analysis Under static loading conditions and with reference to the case of horizontal ground, the bearing capacity of shallow foundations is usually evaluated using the well-known trinomial formula proposed by Terzaghi...

... v BC bearing capacity footings/foundations shear strength The bearing capacity of a shallow foundation under vertical loading is a classical geotechnical problem. Several theoretical models for the bearing capacity of shallow foundations have been proposed. Prandtl (1920...

... 2020 26 11 2020 © 2020 Thomas Telford Ltd 2021 anisotropy bearing capacity footings/foundations numerical modelling Fabric anisotropy of sand has long been identified as one of the major influencing factors that affect the strength, stiffness and deformation of the material...

... also be applied to short, rigid monopile foundations. 20 06 2019 09 11 2020 © 2020 Thomas Telford Ltd 2020 elasticity finite-element modelling footings/foundations offshore engineering soil/structure interaction stiffness There is increasing interest in employing...

... clays design finite-element modelling footings/foundations shear strength statistical analysis Cone penetrometer test data (mainly penetration tip resistance, sleeve friction and the excess pore pressure) have been used to provide information about soil identification (Robertson, 1990...

... are reported in the section entitled ‘Partially drained numerical analyses results’, were performed as follows. 21 11 2019 02 07 2020 © 2020 Thomas Telford Ltd 2020 bearing capacity clays consolidation footings/foundations numerical modelling In the last 30 years...

... interaction. Here, two configurations are considered: a ‘raft’ foundation that is continuous beneath the entire building footprint, and a ‘separate footing’ foundation (strip footings parallel to the tunnel axis) that is discontinuous in the direction transverse to the tunnel axis (see Fig. 1). The paper...

... (Dyvik & Madshus, 1985). © 2020 Thomas Telford Ltd 2020 centrifuge modelling earthquakes footings/foundations laboratory tests liquefaction numerical modelling Despite the valuable insights gained from such centrifuge experiments, a comprehensive study of the problem through...

... and point moment loads as 3 S i j = G x j , x i T , i ≠ j where 06 01 2019 23 04 2020 © 2020 Thomas Telford Ltd 2020 elasticity footings/foundations offshore engineering soil/structure interaction stiffness...

... failure footings/foundations limit state design/analysis slopes Earthquakes have significant destabilising effects on a wide variety of geotechnical structures, including shallow foundations and slopes. Evaluating seismic bearing capacity for shallow foundations placed near slopes is a critical...

... is demonstrated using dynamic centrifuge test data. 02 07 2019 05 03 2020 © 2020 Thomas Telford Ltd 2020 earthquakes footings/foundations laboratory tests model tests piles & piling soil/structure interaction Pile foundations are widely used on land and offshore to transfer...

... to 78%; see Table 2 . 03 09 2019 22 01 2020 © 2020 Thomas Telford Ltd 2020 centrifuge modelling footings/foundations sands The design of shallow foundations requires consideration of the ultimate and serviceability limit states (ULS and SLS). In sands...