... state design/analysis piles & piling Regione Lazio (Italy) and Italferr S.p.A. within the programme POR-FSE 2014-2020 F83C22000770005 Italian Department of Civil Protection and Reluis Consortium in the framework of the national project DPC-ReLUIS 2024-2026 WP16 The research...

.... Consequently, large-diameter pipe piles are expected to exhibit full coring behaviour during installation, resulting in a constant A_re with depth. bearing capacity codes of practice & standards foundations full-scale tests piles & piling sands...

... model axially loaded piles elasticity piles & piling pile-to-pile interaction soil-structure interaction A p pile cross-sectional area A n × n interaction-factor matrix a m mth eigenvalue B m ( R...

... of the target embedment and complete the installation using a driving hammer. The programme of tests described in this paper involved piles installed by vibration to half their length followed by impact driving, as well as piles that were impact driven and vibrated over their full length. piles...

... piles & piling 31 07 2024 31 12 2024 © 2025 Emerald Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only Table 1. Physical and constitutive parameters adopted for the concrete damaged plasticity (CDP) model γ: kN...

... piles to the lateral load responses of new piles through the adjustment of the fixities of existing pile heads. design methods & aids loads & loading new and existing piles pile head fixity piles & piling 29 09 2022 30 08 2023 © 2025 Emerald Publishing Limited...

... piles & piling seismic design soil–structure interaction The fact that the behaviour of traditionally designed piles under seismic action may be somehow problematic had already been perceived many decades ago by Margason (1975) in his pioneering contribution, highlighting that the mere...

... 02 2023 © 2023 Thomas Telford Ltd 2023 centrifuge modelling coupled Eulerian–Lagrangian extrusion buckling finite-element modelling monopiles pile tip damage piles & piling The increasing use by the offshore wind industry of large-diameter thin-walled monopile...

... 2022 © 2022 Emerald Publishing Limited 2022 bearing capacity design methods & aids new pile–soil–existing pile interaction pile-head restraints piles & piling Pile foundations are widely used to support buildings and structures owing to their high vertical load-bearing...

... of the epoxy–sand coating. 05 08 2021 22 06 2022 © 2022 Emerald Publishing Limited 2022 centrifuge modelling combined loading limit equilibrium methods numerical analysis piles & piling Static pile group design is typically performed on the basis of vertical bearing...

... and bulk density measurements. chalk micro-CT tomography piles & piling soil/structure interaction © 2022 Emerald Publishing Limited 2022 Neutron imaging-derived volumetric moisture content (θ) in geomaterials is usually computed from radiographs or projections (see e.g. Hassanein...

... laboratory testing piles & piling site investigation Recent offshore North and Baltic Sea wind energy-generating projects have demonstrated that current recommendations are insufficiently reliable to guide safe and economical driven pile design in chalk, a very weak to weak biomicrite limestone...

... lateral load geotechnical engineering piles & piling pile settlement quick prediction settlement settlement-controlled design theoretical analysis theoretical model Fig. 1. Schematic diagram of the centrifuge model Pile foundations have been widely adopted...

... n d β 1 β 2 k μ 0 ζ w 1 w 2 1·2 0·74 1·79 4 3·2 2 65 0·0003 2·5 1·5 © 2021 Thomas Telford Ltd 2021 numerical modelling piles & piling soil/structure interaction pore...

.... anchors & anchorages in situ testing penetrometers piles & piling Published with permission by the ICE under the CC-BY 4.0 license. (http://creativecommons.org/licenses/by/4.0/) 2021 This is an open-access article distributed under the terms of the Creative Commons Attribution...

... Thomas Telford Ltd 2021 field instrumentation full-scale tests piles & piling temperature effects A number of studies examining the thermo-mechanical behaviour of energy piles have now been published. These are a mix of field testing, model testing and numerical modelling; Bourne...

... was obtained, and was supported by the measured excess pore pressure. Under undrained conditions, the peak soil resistance decreases almost linearly with the accumulation of excess pore pressure. © 2021 Thomas Telford Ltd 2021 centrifuge modelling clays offshore engineering piles & piling...

... is properly cited. clays finite-element modelling landslides piles & piling soil stabilisation soil/structure interaction Mass movements are catastrophic events which threaten both infrastructure and human lives. One of the main mitigation methods against these events is to install rows...

... amplitudes of load, smaller than about one-half of the ultimate lateral pile capacity. 17 07 2020 15 01 2021 © 2021 Thomas Telford Ltd 2021 dynamics finite-element modelling numerical modelling piles & piling soil/structure interaction stiffness vibration...

... are proposed here based on the centrifuge test results. 19 11 2018 15 09 2020 © 2020 Thomas Telford Ltd 2020 offshore engineering piles & piling torsion Currently, 81% of existing offshore turbines in Europe are supported by monopile foundations, with gravity base...