... 2024 04 09 2025 © 2025 Emerald Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only centrifuge modelling local drainage numerical modelling particle image velocimetry pipe penetration pipes & pipelines strain localisation Australia...

... the box are 0·15 m long, resulting in a soil–pipe interaction length of 0·7 m. 01 01 2024 28 06 2024 © 2025 Emerald Publishing Limited 2025 buried structures model tests pipes & pipelines soil/structure interaction In pipeline engineering, surface treatment...

... 2022 © 2022 Emerald Publishing Limited: All rights reserved 2022 centrifuge modelling centrifuge tests cyclic amplitude cyclic loading initial fatigue motions pipe–soil interaction pipes & pipelines post-storm motions soil reconsolidation soil remoulding soil stiffness soil...

... 2021 Thomas Telford Ltd 2021 buried structures finite-element modelling full-scale tests pipes & pipelines slopes soil/structure interaction 1 F ¯ h = F h / γ ′ H D 2 Y ¯ = Y / D where F ¯ h...

... response monopile pipes & pipelines sand soil/structure interaction A joint academia–industry project, Solcyp (the French acronym for ‘cyclic solicitations on piles’), was initiated in 2008 with the aim of improving the design methodologies for axially and laterally loaded piles (Puech...

... when those values reached 0·85 mm, 0·58° and 4·32 mm. 12 07 2021 15 10 2021 © 2021 Emerald Publishing Limited: All rights reserved 2021 behaviour of pipe joint bell-and-spigot joint ground movements joints lined-corrugated HDPE pipe normal fault pipe–soil interaction pipes...

... The strain along the pipeline ε(x) can be written as © 2021 Thomas Telford Ltd 2021 offshore engineering pipes & pipelines plasticity Offshore pipelines connect field wells, platforms and onshore processing facilities and are critical infrastructure in the transportation...

... of the pipeline may also cause a build-up of compressive stress along the pipe, which may result in lateral buckling of the pipeline (Bruton et al., 2008). centrifuge modelling clays numerical modelling offshore engineering pipes & pipelines soil/structure interaction Current design...

.... bearing capacity discrete-element modelling pipes & pipelines soil/structure interaction Offshore oil and gas pipelines in deep water are generally laid directly on the seabed, since trenching is uneconomic. During operation these pipelines can be subject to repeated cycles of pressure...

..., leading to a lower value of uplift resistance being applicable for design. A factor of safety could be applied to the uplift resistance in design to achieve this effect. 27 11 2018 12 12 2019 © 2020 Thomas Telford Ltd 2020 buried structures consolidation pipes & pipelines...

... predictions of field behaviour. full-scale tests pipes & pipelines soil/structure interaction High-pressure, high-temperature (HPHT) pipelines experience frequent start-ups and shutdowns, as well as diurnal temperature fluctuations, leading to complex packets of cyclic axial movements...

...·95 92 Raining 16 05 2018 13 09 2019 © 2019 Thomas Telford Ltd 2019 deformation earthquakes ground movements laboratory tests model tests pipes & pipelines sands soil/structure interaction Permanent ground deformations due to fault rupture, landslides...

... model (Chatterjee et al., 2013 ; Zhou et al., 2019), which can be expressed in rate form as 19 11 2018 11 04 2019 consolidation offshore engineering pipes & pipelines soil/structure interaction Steel catenary risers (SCRs) are an efficient option...

... saturation pipes & pipelines sands soil/structure interaction suction © 2018 Thomas Telford Ltd 2018 02 05 2017 29 11 2018 One of the major problems associated with pipelines is related to the deformation of pipelines due to movements of slope or slope failure, ground...

... testing. full-scale tests pipes & pipelines repeated loading sands soil/structure interaction Pipelines are frequently buried to protect them from frost and above-ground activities. The backfill soil surrounding the pipe is a source not only of transverse restraint (in the downward...

... of a hydrocarbon pipeline is minimal compared to the severe stressing introduced by the moving soil. 06 02 2017 01 12 2017 © 2018 Thomas Telford Ltd 2018 buried structures finite-element modelling pipes & pipelines slopes soil/structure interaction Pipelines descending...

... 2017 consolidation pipes & pipelines The in-situ and remoulded shear strength profiles derived from the cyclic ball penetrometer test are shown in Figs 2(a) and 2(b) , respectively. The shear strength profile was calculated by adopting a constant value for N_ball...

... (Randolph, 2004). 07 10 2016 14 03 2017 © 2017 Thomas Telford Ltd 2017 clays limit state design/analysis numerical modelling offshore engineering pipes & pipelines plasticity Offshore oil and gas pipelines are frequently required to operate at high pressure and high...

... modelling offshore engineering pipes & pipelines Offshore risers are pipes used to transport oil and gas from the seabed to a floating vessel. Catenary risers are simply an extension of a seabed pipeline which lifts away from the seabed and hangs as a catenary geometry in the water column (Fig...

... Telford Ltd 2016 clays consolidation pipes & pipelines Soil-interface resistance is a relevant design parameter for a range of geotechnical structures, for example, piles, retaining walls, submarine pipelines, skirted foundations, offshore gravity structures and mat foundations...