This research studied the use of alkaline activation of fly ash, as a silica and alumina amorphous source, to improve soft soils. A laboratory programme – including tests to study strength and deformability development, alternative curing methods, the effect of the different components of the grout, effect of raising initial temperature and comparison with a cement grout – was carried out. Laboratory tests revealed that the use of fly ash and alkaline activator resulted in a soil strength improvement up to 11·4, 16·7 and 43·4 MPa, at 28, 90 and 365 days curing, respectively. The most effective combinations obtained in the laboratory were chosen for the field application with jet grouting. The grout performed adequately to pass standard engineering specifications for soil mixing, achieving up to 26·4 MPa at 90 days curing. The main conclusion is the potential of alkaline activation for soil improvement, and therefore this research has created a basis for further studies.
Article navigation
May 2011
Research Article|
May 01 2011
Deep soft soil improvement by alkaline activation
Nuno Cristelo, MEng, PhD;
Nuno Cristelo, MEng, PhD
Associate Professor
Trás-os-Montes e Alto Douro University, Portugal
Search for other works by this author on:
Stephanie Glendinning, PhD;
Stephanie Glendinning, PhD
Reader in Environmental Geotechnics
Newcastle University, UK
Search for other works by this author on:
Amândio Teixeira Pinto, PhD
Amândio Teixeira Pinto, PhD
Associate Professor
Trás-os-Montes e Alto Douro University, Portugal
Search for other works by this author on:
Publisher: Emerald Publishing
Revision Received:
September 25 2009
Accepted:
May 07 2010
Online ISSN: 1755-0769
Print ISSN: 1755-0750
ICE Publishing: All rights reserved
2011
Proceedings of the Institution of Civil Engineers - Ground Improvement (2011) 164 (2): 73–82.
Article history
Revision Received:
September 25 2009
Accepted:
May 07 2010
Citation
Cristelo N, Glendinning S, Teixeira Pinto A (2011), "Deep soft soil improvement by alkaline activation". Proceedings of the Institution of Civil Engineers - Ground Improvement, Vol. 164 No. 2 pp. 73–82, doi: https://doi.org/10.1680/grim.900032
Download citation file:
New and popular articles
Suggested Reading
Estimating column diameters in jet-grouting processes
Proceedings of the Institution of Civil Engineers - Ground Improvement (February,2018)
Six Sigma – so what?
Assembly Automation (January,2006)
Quality street
Assembly Automation (January,2006)
Quality Control in Soft Contact Lens Manufacture — A Case Study
International Journal of Quality & Reliability Management (January,1988)
Cusum Charts — Give Your Data a New Look
International Journal of Quality & Reliability Management (February,1988)
Related Chapters
Analysis of single-fluid jet grouting
Ground and Soil Improvement
Field Measurement by Fully Grouted Vibrating Wire Piezometers
Crossrail Project: Infrastructure Design and Construction
Remedial Grouting at Shon Sheffrey Dam, Wales
Maintaining the Safety of our Dams and Reservoirs: Proceedings of the 18th Biennial Conference of the British Dam Society at Queen’s University, Belfast, from 3–6 September 2014
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
