Impact evaluation of polypropylene fibres on the engineering behaviour of Siwalik clay Available to Purchase

In the Kashmir region of Pakistan, the presence of Siwalik clays engenders serviceability issues to the infrastructure causing substantial loss of property. In this study, an attempt has been made to address these issues using polypropylene fibres (PPFs) as a sustainable modifier. These fibres were used in five different proportions, namely 0.25, 0.5, 0.75, 1 and 1.25% as partial replacement of base soil to analyse their impact on the engineering behaviour of matrices. Classification, compaction, indirect tensile, unconfined and triaxial compression, swell potential, consolidation and California bearing ratio (CBR) tests were conducted on controlled as well as reinforced-clay samples for comparative analyses. The maximum improvements were observed in unconfined compressive strength (109%), tensile strength (300%), cohesion (13%), friction angle (110%), soaked CBR (800%) and un-soaked CBR (550%). Besides, the reduction in swelling strain by 92% was also recorded corresponding to 1 kPa effective vertical stress. The capital cost analyses showed that PPFs reduced the costs of backfill behind the retaining wall and foundation soil beneath isolated footing by 21 and 44.5%, respectively. Moreover, the modifier had no adverse effect on the aqueous media. Conclusively, PPFs can be used as sustainable modifiers leading to a potential solution for serviceability issues.