... to ISO 17892-7:2017 (ISO, 2017) with a strain rate of 1.5%/min. The unconfined compressive strength ( q u ) was determined as the peak stress or at 10% strain if a strain-hardening curve was obtained. The secant Young’s modulus up to 50% of peak stress ( E 50 ) was evaluated taking...

.... The soil was mixed with 5%, 10%, 15%, and 20% of G and CW by weight, and unconfined compressive strength tests were performed after 7 and 28 days of curing. Results indicated a significant improvement in shear strength, with values reaching up to 440 kPa after 28 days. Oedometer tests further revealed...

... not only predict the behaviour of the composite material but also provide the effect of the input parameters on the response. This confirms experimental results that suggest that the binder content is the most important parameter when analysing the unconfined compressive strength and failure mode. It also...

... requires reliable predictive tools for assessing unconfined compressive strength (UCS). This study explores the use of machine learning algorithms to predict UCS in soil stabilised with a one-part alkali-activated binder. An experimental data set was compiled to train and validate multiple machine learning...

... of the stabilised soil explained by the strain-hardening effect induced by the cyclic loading. Emerald Publishing Limited: All rights reserved 2024 compressive strength repeated loading soil stabilisation testing & evaluation UN SDG 9: Industry, innovation and infrastructure UN SDG 11: Sustainable...

..., was obtained from Lucky Plastic Industries Islamabad, Pakistan. 10 03 2023 23 02 2024 Emerald Publishing Limited: All rights reserved 2023 bearing capacity clays compressive strength particle size soil sustainability UN SDG 9: Industry, innovation and infrastructure...

... of the mercury intrusion porosity tests have already been reported and discussed (Boutouil and Levacher, 2001 , 2002). The main conclusions are as follows: cement compressive strength sediment solidification water consumption water content In the field of concrete engineering, it is well...

.... This paper concerns experiments and discussion results on the effect of various factors (cement content, type of cement, curing conditions and additive content) on the macroscopic behaviour, specifically the unconfined compressive strength (UCS) before and after immersion in water, of a solidified harbour...

... binder, fly ash and silica fume) on unconfined compressive strength (UCS) before and after immersion in water, were studied. This paper examines the total porosity and the microstructure of the solidified sludge as well as the strength–porosity relationship. The total porosity values ranged from 37 to 56...