... of conventional polystyrene (0.17–0.2 MPa). The thermal conductivity of raw CP was measured at 0.05 ± 0.003 W/mK, while cane-resin composites ranged from 0.038 to 0.042 W/mK. Morphological analysis revealed interconnected air gaps within the foam matrix, quantified at 27 ± 8%, contributing to enhanced thermal...

... performance with the thermal conductivity of 0.075 W/(m·K), and the strengths of dry adhesion and wet adhesion of 1.63 and 0.82 MPa, respectively. The contact angle was 97.8°. Hydrophilic aerogels are easy to absorb water vapor and connect with each other, resulting in high thermal conductivity of the coating...

... a rheometer (Anton Paar model MCR92, Australia). The transient hot-wire method was used to measure the thermal conductivity of all prepared nanofluids using a Tempos thermal property analyzer (Meter Environment, USA) consisting of very sensitive sensor needles (KS-3) with a controller. This KS-3 sensor...

... and thermal conductivity. The results obtained show that the hygrothermal properties of this material make it suitable as a thermal insulator, having a thermal conductivity value of 0.043 W/(m K) and absorbing less than 9% humidity in environments of up to 85% relative humidity. The strains of macromycete...