The concept of using milled waste glass as partial replacement for cement in cement paste and mortar was investigated to reduce the adverse environmental and energy impacts of cement and cement-based products. Based on the experimental investigations it was found that waste glass, when milled to micro-scale particle size, undergoes pozzolanic reaction with cement hydrates. These reactions bring about favourable changes in the structure, including pore system characteristics of the hydrated cement paste and mortar. Use of milled waste glass, as partial replacement of cement, produced significant gains in the resistance to moisture sorption, chemical stability and improvement in microstructure of the cementitious materials. Milled waste glass was also found to suppress alkali–silica reactions. Unlike normal pozzolanic reactions, those involving glass do not reduce the alkalinity of cement paste; this is favourable to the chemical stability of cement-based materials and the protection of reinforcing steel against corrosion in concrete.alues derived using available design codes.
Article navigation
July 2012
Research Article|
July 01 2012
Green and durable mortar produced with milled waste glass Available to Purchase
Roz-Ud-Din Nassar;
Roz-Ud-Din Nassar
Research Associate, Civil and Environmental Engineering Department, Michigan State University, USA
Search for other works by this author on:
Parviz Soroushian
Parviz Soroushian
Professor, Civil and Environmental Engineering at Michigan State University, USA
Search for other works by this author on:
Publisher: Emerald Publishing
Revision Received:
May 11 2011
Revision Requested:
October 23 2011
Accepted:
November 25 2011
Online ISSN: 1751-763X
Print ISSN: 0024-9831
ICE Publishing: All rights reserved
2012
Magazine of Concrete Research (2012) 64 (7): 605–615.
Article history
Revision Received:
May 11 2011
Revision Requested:
October 23 2011
Accepted:
November 25 2011
Citation
Nassar R, Soroushian P (2012), "Green and durable mortar produced with milled waste glass". Magazine of Concrete Research, Vol. 64 No. 7 pp. 605–615, doi: https://doi.org/10.1680/macr.11.00082
Download citation file:
Sign in
Don't already have an account? Register
ICE Member Sign In
Log inPurchased this content as a guest? Enter your email address to restore access.
Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve.
Suggested Reading
Modelling bond strength of corroded plain bar reinforcement in concrete
Structural Concrete (September,2007)
The use of prestressed concrete piles to support integral abutments
Structural Concrete (September,2007)
Concrete members with plate reinforcement: mechanical bond analysis
Structural Concrete (December,2007)
Bond behaviour of NSM FRP strips in service
Structural Concrete (September,2008)
Failure analysis of a thin-webbed girder of post-tensioned concrete
Structural Concrete (March,2006)
Related Chapters
LIGHT WEIGHT CONCRETE APPLICATION IN BRIDGES
Concrete for Transportation Infrastructure: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 5–7 July 2005
CONCRETE FOOTBRIDGES
Concrete for Transportation Infrastructure: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 5–7 July 2005
A new assessment model for shear in reinforced concrete bridges with short anchorage lengths
Bridge Management 5: Inspection, maintenance, assessment and repair: Proceedings of the 5th International Conference on Bridge Management, organized by the University of Surrey, 11–13 April 2005
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
