Modelling the corrosion mechanism of steel bars in chloride-contaminated concrete with transverse cracks

The development of cracks in reinforced concrete structures can accelerate structural deterioration and reduce service life. A numerical model was established to analyse steel bar corrosion in chloride-contaminated concrete with transverse cracks. In the model, the dynamic distinction between anode and cathode regions on the steel surface is considered by introducing an empirical formula for the anodic Tafel slope related to chloride concentration. The time-dependent characteristics of the corroded region were examined using the proposed corrosion prediction model and the corrosion process of steel bars in cracked concrete was revealed. The effects of crack width and crack spacing on steel corrosion were analysed in detail in terms of the corrosion area and corrosion rate. The results showed a variation in the corrosion area adjacent to cracks over time and a positive correlation between corrosion area and the square root of time. According to the micro-cell and macro-cell contributions to the corrosion rate, the process of steel bar corrosion was determined to occur in three stages. The effects of transverse cracks on the corrosion rate were found to vary with exposure time and to depend on the control steps of the micro- or macro-cells.