Optimisation of mechanical properties and pore structure of lightweight geopolymer concrete Available to Purchase

Lightweight geopolymer has good physical and mechanical properties, thermal and chemical stability and low carbon dioxide emissions. The development of high-strength lightweight geopolymer concrete (LGC) for load-bearing structures can expand geopolymer applications. The use of ground granulated blast-furnace slag (GGBFS) to improve the mechanical properties and pore structure of LGC was investigated. The ultimate compressive stress of LGC containing GGBFS were analysed, as well as the variation in microscopic pore structure. Specimens of LGCs with different strengths (LC20, LC30 and LC40) were investigated. As the GGBFS content increases, the ultimate compressive stress and specific strength of LGC increases, while the strain corresponding to the peak stress decreases, indicating that the mechanical properties and deformation resistance of LGC are improved. The carbon dioxide emissions of LGC are less than those of cement-based lightweight concrete, indicating that LGC has good sustainability. Moreover, the addition of GGBFS can produce more gel and reduce the volume proportion of capillary pores and air pores, resulting in LGC densification. Recommended GGBFS contents for strength grades LC20, LC30 and LC40 are 0–12.7%, 12.7–24.6% and 24.6–30%, respectively. The LGC is lightweight and has high strength, and has potential for application in civil engineering.