A non-linear short-wave propagation model is used for the simulation of low-frequency waves induced by short-wave groups. The model is based on the higher order Boussinesq-type equations for the propagation of breaking and non-breaking waves in nearshore areas. The 2DH (two horizontal dimensions) Boussinesq model is used to calculate the resonant response of harbours due to bound waves generated by short-wave groups. The results are compared with experimental data available in the literature. In these experiments, bound long waves are generated by carrier bichromatic short waves, which form regular wave groups. The results of the model were found to be in good agreement with the experimental data. The 1DH Boussinesq model is applied in the surf zone to simulate surf beat generation by a time-varying breakpoint and the reflected long wave induced by bichromatic wave groups. A new breaking criterion is introduced, based on the relative trough Froude number. Model generation of the surf beat is also shown to be in good agreement with experimental data.
Article navigation
December 2004
Research Article|
December 01 2004
Resonant response of harbours to short-wave groups
Th. V. Karambas;
Th. V. Karambas
Associate Professor
Dept. of Marine Sciences, University of the Aegean
Lesbos, Greece
Search for other works by this author on:
C. Koutitas
C. Koutitas
Professor
Hydraulics Lab., Department of Civil Engineering, Aristotle University of Thessaloniki
Greece
Search for other works by this author on:
Publisher: Emerald Publishing
Received:
May 19 2004
Accepted:
November 15 2004
Online ISSN: 1751-7737
Print ISSN: 1741-7597
© 2004 Thomas Telford Ltd
2004
Maritime Engineering (2004) 157 (4): 163–170.
Article history
Received:
May 19 2004
Accepted:
November 15 2004
Citation
Karambas TV, Koutitas C (2004), "Resonant response of harbours to short-wave groups". Maritime Engineering, Vol. 157 No. 4 pp. 163–170, doi: https://doi.org/10.1680/maen.2004.157.4.163
Download citation file:
New and popular articles
Suggested Reading
Seabed modelling with a least-squares support-vector machine and sample cross-validation
Maritime Engineering (March,2020)
Jet scour
Maritime Engineering (December,2011)
The time evolution of scour around offshore structures
Maritime Engineering (March,2010)
Collaborative maritime design using sequential optimisation and reliability assessment
Maritime Engineering (February,2020)
Reliability-based optimisation for offshore structures using saddlepoint approximation
Maritime Engineering (April,2020)
Related Chapters
Beyond Deductivism
Including a Symposium on Bruce Caldwell’s Beyond Positivism After 35 Years
Measurement and modelling of conduction in carbon fibre-cement composites
ICE Themes Smart Concrete
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
