...-scale test geotechnical engineering renewable energy The successful transition to renewable energy, imperative to reach net-zero targets and address energy security concerns, can only be achieved if supported by adequate infrastructure to deliver clean electricity from production sites...

... Emerald Publishing Limited Licensed re-use rights only centrifuge modelling geotechnical engineering model tests models (physical) piles and piling tapered piles The bearing capacity of piles is an essential component in geotechnical design involving buildings, bridges, and offshore...

... to the original publication and authors. The full terms of this licence may be seen at Link to the terms of the CC BY 4.0 licence. centrifuge modelling foundations geotechnical engineering piles and piling soil structure interaction AR advancement ratio CD consolidated, drained...

... Limited Licensed re-use rights only centrifuge modelling geotechnical engineering offshore renewable energy A series of loading tests was conducted on three suction anchors installed in normally consolidated clay. The experiments utilised the 4.5 m radius geotechnical centrifuge...

... structures gas transportation pipelines geotechnical engineering model tests physical modelling pipes and pipelines soil-structure interaction A length of the trench (Fascicule 70) [m] B width of the trench (Fascicule 70) [m] C u uniformity coefficient...

... to the centrifuge platform through the manhole using the in-house crane facility. centrifuge modelling dynamics earthquakes geotechnical engineering model tests seismic engineering The use of geotechnical centrifuges in earthquake engineering has increased enormously in recent years because...

... displacement. 02 09 2024 29 01 2025 Emerald Publishing Limited: All rights reserved 2025 foundations geotechnical engineering laboratory tests shallow foundations suction UN SDG 7: Affordable and clean energy A_skirt cross-sectional area...

... Publishing Limited: All rights reserved 2024 composite structures foundations geotechnical engineering gravels shear model test shear strength UN SDG 9: Industry, innovation and infrastructure Structures built on soft soil sites often are subjected to three problems, bearing capacity...

...) Analysis of buried oil and gas pipelines crossing active faults: revisiting pipe-ground interaction . In Proceedings of the 7th International Conference on Geotechnical Earthquake Engineering, Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions ( Silvestri...

... drilling machine that rotates as well as a control for the lifting speed of the jet nozzle. Figure 2. Micro-jet-grouting machine with steel tank and its transition system ICE Publishing: All rights reserved 2021 geotechnical engineering ground improvement grouting The grout...

... to and in the loading directions, respectively, which are obtained from LVDT₂ and LVDT₃. The changing characters of vertical displacement are shown in Figure 5 . 13 11 2020 08 04 2021 ICE Publishing: All rights reserved 2021 geotechnical engineering limit equilibrium...

.... This study provides such detail by direct observation of the particle segregation within the layer and the extent of the disturbance by boundary effect of the container. models (physical) geotechnical engineering quality control 11 08 2020 08 04 2021 ICE Publishing: All rights...

..., it was confirmed that in the ground where vacuum consolidation was applied, large negative pressure propagated near the drain material, and the increase in pore water pressure due to embankment loading was suppressed. design methods & aids embankments geotechnical engineering Vacuum consolidation...

... 2019 29 05 2020 ICE Publishing: All rights reserved 2020 centrifuge modelling geotechnical engineering suction The cone penetration test (CPT) has been widely used in the field to determine the bearing resistance of soils. Numerous research studies have been performed...

... modeling approach for estimating 1-D heave with respect to time for expansive soils . International Journal of Geotechnical Engineering   7 (2): 199 – 204 . Altafi-Dadgar   M , Nakhaei   M , Porhemmat   J , Biswas   A and Rostami   M (2018) Transient potential groundwater recharge...

...:1 plot. 31 10 2018 14 02 2020 ICE Publishing: All rights reserved 2020 geotechnical engineering models (physical) strength & testing of materials Sensitive clay landslides represent a significant hazard in many parts of Eastern Canada and Scandinavia, often...

... this material to simulate the roof rock and floor rock of a coal seam with low permeability, which demonstrates the feasibility and applicability of the material. geotechnical engineering model tests permeability 1 k g = 2 μ p 0 Q L A ( p 1 2 − p 2 2...

... are comparable with those obtained from fall cone tests. The findings reported in this paper illustrate the capability of full-flow penetrometer tests to measure the undrained strength of peat. 20 09 2018 23 08 2019 ICE Publishing: All rights reserved 2019 geotechnical engineering...

... geotechnical engineering piles & piling sands Pile foundations are designed and constructed when superstructures are under large lateral loading such as wind, earthquake, ship docking and wave, especially when they are located on loose, soft and weak soil. Usually, piles are under moment...

... proposed by Stanier and White (2013) 1 ASR = I px − I px , i = 1 I px , i = n − I px , i = 1 foundations geotechnical engineering granular materials Open caissons are deep foundations sunk into the ground...