... to the refinery. This paper describes the reliability, availability and maintainability evaluation of the refining system in Skikda refinery (Algeria).The transfer system was divided into three subsystems A, B and C and the results of each subsystem were obtained along with the main system. The aim of this study...

...Ashish Kumar; Sumaira Rasool; Vijay Singh Maan; Monika Saini Purpose The key objective of the present study is to conduct a comprehensive analysis of the performance of the screening unit in the paper manufacturing plant through reliability, availability, maintainability and dependability (RAMD...

.... Performability Availability Decision matrix Markov method RAMS Today, automation in industries has become a complicated task for engineers and managers to maintain these complex systems, which involve massive capital. The demand for higher availability of these systems increases day by day...

..., AND/OR gate transitions expression was employed. Findings For 15%–30% spread, unit’s availability for the membership function falls by 0.006442%, and it falls even more by 0.014907% with an increase in spread from 30% to 45%. In contrast, for 15%–30% spread, the availability of non-membership function...

... was integrated within FMEA to recognize the most critical failure causes associated with various subsystem/components. Findings The availability of the unit falls by 0.053% as the uncertainty level increases from ±15 to ±25% and further decreases to 0.323% as the uncertainty level increases from ±25 to ±60...

... is then carried out between the classic PM policy and developed PMP, and the improvement in availability, mean time between failures and reduction in maintenance cost is registered. Originality/value The proposed PMP takes care of the equipment degradation more efficiently than any other existing maintenance...

... the redundancy allocation problem. Findings Analysis of availability, reliability, mean time to failure and steady-state availability of the system is introduced. The measures of the system are discussed in special two cases when the elapsed repair time follows gamma and exponential distribution...

..., the authors highlight each of the elements of the proposed framework. Figure 2 AAPM 8S implementation approach Management Availability Reliability Maintainability Maintenance Asset Maintenance modelling Over the past few years, the global business environment has gone through...

...Himani Pant; S.B. Singh Purpose The system encountering dormant failure subject to sequential inspections is modeled and the emphasis is made on determining the availability and long-run average cost rate for the model. The derived results are then utilized to obtain the optimal inspection period...

... for the system. Findings The effectiveness measures of the system are discussed such as availability, reliability, steady-state availability and mean time to system failure. The life and repair times of the system units are assumed to be discrete follow discrete Weibull distribution. Also, the parameters...

... wind turbine components are considered. Optimization is performed for maximizing availability or minimizing cost. Optimization is also conducted for minor repair activities to find the optimal number of joint repairs. Findings The wind turbine condition uncertainty and its prediction are important...

.../approach The truck dispatching simulation model with consideration of age-based maintenance is proposed. Findings This paper underlines an impact of truck dispatching decisions and reveals remarkable differences in the total production under different approaches of operational availability...

...Franco Jefferds dos Santos Silva; Herbert Ricardo Garcia Viana; André Nasser Aquino Queiroz Purpose The purpose of this paper is to present a methodology for forecasting the availability off-highway trucks used in a fleet for large transport operations of ore and sterile rock from an open pit mine...

... standards within the risk and dependability areas were applied. Finally, the conclusions of the study were verified by key informants. Findings – Through the proposed risk‐based dependability approach, critical availability goals are communicated with and involve top management. The approach also...

... Repairable fault tree Availability Minimal cut sequences The fault tree (FT) is widely used as a tool for quantitative risk assessment. One of the main aims in FT analysis is to obtain the exact top event probability of an FT, but the exact analysis of a reasonably large scale FT with a complex...

...Jakiul Hassan; Faisal Khan; Mainul Hasan Purpose – The purpose of this paper is to propose a risk‐based approach for spare parts demand forecast and spare parts inventory management for effective allocation of limited resources. Design/methodology/approach – To meet the availability target...

... appropriate metrics to assess CBM. Design/methodology/approach A simulation model was developed to explore the effects of production context using traditional performance indicators (costs and availability of each piece of equipment) and a more comprehensive metric (line efficiency). Findings...

..., a stochastic model is proposed to assess and to analyze the availability of reconfigurable systems whose equipments are subject to random failures. To distinguish between the normal behavior and the degraded one, the production rate is used as a performance measure. An availability model that takes...