Maximum loads on shores during the construction of buildings

This paper describes a simplified method of estimating maximum loads on shores during the construction of multistorey buildings with in situ casting. Calculating this maximum value is fundamental to establish the design load of the shores and thus avoid possible safety problems caused by selecting the wrong type of shore. The procedure was verified and showed a good fit with both the experimental measurements and finite-element method calculations. This simplified procedure will be useful to both researchers and practitioners, who have to deal with this problem in the course of their daily work. The proposal also represents an important technology transfer to the industry as it is in the form of a simplified tool that comes fairly close to the results obtained by complex calculation methods. Actually, the maximum load obtained from the simplified method is 20·72 kN, which is very close to the value 21·37 kN obtained from an advanced finite-element model.