... Publishing Limited 2026 Emerald Publishing Limited Licensed re-use rights only bearing capacity composite beam concrete strength concrete structures cracks & cracking finite-element modelling mechanical properties stud spacing UN SDG 9: Industry, innovation and infrastructure...

... . Engineering Structures 121 : 61 – 74 , 10.1016/j.engstruct.2016.04.043 . Shiradhonkar SR and Shrikhande M (2011) Seismic damage detection in a building frame via finite element model updating . Computers & Structures 89 (23–24) : 2425 – 2438 , 10.1016/j.compstruc.2011.06.006...

... (ghaffari@torbath.ac.ir) 10 11 2025 24 02 2026 © 2026 Emerald Publishing Limited 2026 Emerald Publishing Limited Licensed re-use rights only box-profile shear connectors BP connector concrete structures finite-element modelling flexural behaviour overlap ratio SCS steel...

... and Karim, 2023). cyclic loading fibre-reinforcement finite-element modelling GFRP bars high-performance concrete hybridmaterials hybrid reinforcement Not applicable. A cross-sectional area of the column (mm^{2) b section width (mm}...

... & design finite-element modelling node-end connection node selection parametric analysis semi-dry connection structural frameworks Key Research Project of Henan Province 24A56002 Science and Technology Key Project of Henan Province 252102320296 The work was supported by the Key...

... building materials columns confinement finite-element analysis finite-element modelling reinforced concrete theoretical analysis a_rs reduction in size of aggregate E_c modulus of elasticity of concrete E_s modulus...

... Emerald Publishing Limited: All rights reserved 2025 buildings, structures & design construction finite-element modelling steel structures structural analysis The swivel construction method is a type of bridge construction technology (Zhou and Zhang, 2019) that is particularly...

... decrease the failure load. A simplified finite-element modelling approach is presented to estimate the local buckling pressure of such panels. In the proposed approach, only the face sheet under compression is modelled, thus avoiding the need to perform a full three-dimensional (3D) structural analysis...

.... The characteristics of model development were as follows. artificial neural networks finite-element modelling lateral torsional buckling numerical modelling steel I-beams structural analysis Shell elements of dimension 10 mm were used for discretising the sections (Figure 2). Loads were applied...

... Publishing Limited: All rights reserved 2023 blast loading coupled thermal–structural analysis finite-element analysis finite-element modelling fire analysis fire engineering fire loading LS-Dyna monolithic domed structure The response of structures or structural elements under blast...

... in Table 3 . The experimental data given by Wang et al. (2013) was used to validate the accuracy of the finite-element model created using the ConWep blast modelling technique. A series of experimental tests was carried out by Wang et al. (2013) on a two-way reinforced...

... hypercube sampling method is employed to generate random scouring scenarios in the finite-element model, including uniform and non-uniform scour. Then, fragility curves are developed utilising cloud dynamic analysis. The results reveal that the scouring pattern is one of the most crucial sources...

... adhesive. A non-linear three-dimensional finite-element modelling study was performed using Abaqus software for the analysis of the beams. The non-linear finite-element modelling was verified against tests on compound steel beams with different cross-sections. An extensive parametric study was carried out...

.... Computer software based on finite-element methods, such as the package Abaqus, is widely used in research instead of, or in parallel with, the experimental work. The finite-element model has been found to be dependable in much previous research in the literature (Anapayan and Mahendran, 2012 ; Hassanein...

... structure: (a) quarter symmetric finite-element model with blast and fragments; (b) quarter symmetric layout of sandwich structure; (c) quarter symmetric layout of fragments for 50 g and 100 g; (d) quarter symmetric layout of fragments for 150 g 30 08 2022 30 01 2023 Emerald Publishing...

... blast loading concrete structures ConWep earthquakes finite-element modelling LS-DYNA UN SDG 9: Industry, innovation and infrastructure As the name implies, ‘multi-hazard’ is defined as the occurrence of multiple types of loading scenarios (e.g. landslides, earthquakes, volcanic eruptions...

...-based mechanical model of two-strand and four-strand SC-PC-FD connections: (a) SAP2000 and Abaqus models; (b) hysteresis and pushover curves 08 12 2022 15 03 2023 Emerald Publishing Limited: All rights reserved 2023 earthquakes finite-element modelling steel steel...

... was used to model a push-out specimen and the finite-element model was successfully validated using published experimental results. The six different CPSR studs encased in three grades of concrete (C40, C50 and C60) were tested for shear strength, stiffness and load–slip performance. The results...

... can transform the industry towards net-zero. 22 08 2022 15 03 2023 Emerald Publishing Limited: All rights reserved 2023 computational design concrete structures digital fabrication finite-element modelling shells UN SDG 12: Responsible consumption and production UN SDG 13...

..., structures & design cyclic combined loading cyclic exposure finite-element modelling numerical modelling reinforced concrete simulation structural design structural member sustainable development The interaction of lateral loading and axial force in reinforced concrete structural members...