.... Optimal CrAlY NPs (49 nm, −25.1 mV zeta potential) were achieved with 4 wt.% ethanol for 48-h milling ball (75% cycle), yielding a composition close to 61.3Cr–37Al–1.7Y wt.%. Electrodeposited CoNi–CrAlY coatings, featuring dominant face-centered cubic (E.4 series) and hexagonal close-packed (E.6 series...

.../ZnO composite was successfully produced, as shown by the X-ray diffraction methods. The optical characteristics of the PVP/ZnO were investigated using ultraviolet–visible spectroscopy. The band gap reduced from 4.83 eV for PVP to 2.81 eV for PVP/ZnO, and the absorption edge reduced from 4.81 to 2.76...

...Ali Atta; Reem Altuijri; Nuha Al-Harbi; Ahmed M. A. Henaish In this work, the polyethylene oxide (PEO) polymer and nanofiller gadolinium oxide (Gd₂O₃) are combined to produce the composite (PEO/Gd₂O₃) for application in optical materials with high...

... patterning technique using a UV pulse laser can eliminate the need for complex photolithography masks. The optimal UV pulsed laser peak fluence was ∼1.43 J/cm² to pattern and sinter the eGaIn/PUA composite electrode simultaneously. The laser-patterned eGaIn/PUA composite electrode under optimal...

.... Additionally, the incorporation of additional metals or semiconductors in the formation of composites has been shown to enhance the photocatalytic efficiency of the material. 12 , 13 Another approach to boosting the photocatalytic activity involves utilizing materials with plasma properties or high heat...

...Yaru Zou, MSc; Yaojun Lu, MSc; Sajjad Ur Rehman, PhD; Xuehui Zhang, PhD; Sangen Luo, MSc; Chaoxiang Jin, PhD; Zhenggang Zou, PhD; Bin Yang, PhD; Munan Yang, PhD In this work, the authors studied the corrosion resistance of composite deposits of yttrium (III) oxide (Y₂O₃...

... way and the formulas for the ratios of different samples are shown in Table 1 . (corresponding author: b.ou@hnust.edu.cn) 09 09 2022 01 11 2022 Emerald Publishing Limited: All rights reserved 2023 anti-corrosion coatings composites self-healing...

... oxycarbide (CNFA/SiOC) composites were prepared following a precursor infiltration pyrolysis procedure by using three-dimensional CNFA as a skeleton. Their structures and mass densities (0.28–1.35 g/cm³) were tunable by adjusting the content of the polysiloxane precursor in the impregnating...

... spectrometer with a laser length of 532 nm. The X-ray photoelectron spectroscopy (XPS) spectra were recorded using an Escalab 250Xi spectrometer. (corresponding author: danli@zzu.edu.cn) 13 11 2020 15 01 2021 ICE Publishing: All rights reserved 2021 batteries composites energy...

... by scanning electron microscopy. The element contents of the MAO coatings were analyzed by energy-dispersive spectroscopy. The hardness of the coatings was measured by using a microhardness tester. The phase composition was analyzed by X-ray diffraction, and the corrosion resistance was evaluated...

... the potential energy of the composite and the potential energy of the polymer and SWCNT as follows 25 , 26 1 E interaction = E total − E SWCNT − E polymer (corresponding author: njustzdh@126.com) 23 04 2019 10 06 2019 ICE Publishing: All rights...

... author e-mail address:   kkornev@clemson.edu 12 02 2016 06 05 2016 ICE Publishing: All rights reserved 2016 characterisation composites contact angle A phenomenological constant of proportionality AND Anderson stone A p 1 surface area...