... Publishing Limited 2026 Emerald Publishing Limited Licensed re-use rights only composites material characterization optoelectronics polymers structural structural properties Deanship of Graduate Studies and Scientific Research at Jouf University DGSSR-2025-FC-01016 This work...

... the surface of ancient book paper. The polymer coating was constructed on the surface of ancient book paper by spraying 2-butanone/poly(tert-butyl methacrylate-dodecafluoroheptyl methacrylate) mixed solution. Compared to pristine water-absorbing ancient book paper, the modified ancient book paper...

... disperse dye green coatings material fabrication photofading photostability polymers polysulfonamide fibers surface UV absorption L* lightness value in colorimetric analysis M_w molecular weight T_g glass transition temperature...

... Publishing Limited: All rights reserved 2024 adhesive plasma processing polymers surface modification B width of the sample F peel force I intensity R_a surface roughness T time σ_T...

... high solubility, low surface tension, and good foam stability is a great challenge. Herein, the ‘comb-like’ zwitterionic polymer surfactant based on chitosan by partial N-alkylation and quaternization was prepared. The experimental results demonstrate that the length and degree of substitution...

..., solubilization, rheological) of a pyrrolidinium surfactant with a hexadecyl hydrocarbon tail and a hydroxyethyl moiety at the nitrogen (N) atom in the presence of polymers (poly(acrylic acid), poly(ethylene glycol) and poly(vinylpyrrolidone)) and hydrotropes (sodium salicylate, sodium benzoate and sodium...

... of nanocomposites based on quantum dots and polymers is a way of combining the benefits of quantum dots, such as their fundamental novelty and biomedical perspectives, with technological capabilities of polymers. The aim of this work was to synthesize cadmium selenide (CdSe) quantum dots in the presence of polymers...

...Thierry Darmanin; Guilhem Godeau; Frédéric Guittard From a bioinspired approach, this review reports most of the techniques used in the literature to prepare superhydrophobic, superoleophobic and underwater superoleophobic films using conducting polymers. These techniques include the formation...

... was investigated by methods of, galvanostatic charge/discharge, cyclic voltammetry and alternating current impedance. As expected, the cauliflower-like TsONa-doped PPy particles tightly combined with the surface of the iron foil without any additional polymer binders; and also, the resultant TsONa/PPy/iron cathode...

...Małgorzata Wiśniewska; Konrad Terpiłowski; Salvador Perez Huertas; Iwona Ostolska; Katarzyna Szewczuk-Karpisz; Olena Goncharuk The effects of solid content, temperature, supporting electrolyte (sodium chloride (NaCl)) concentration, solution pH, molecular weight of synthetic non-ionic polymer...

.... The modification was carried out by immersion of cotton fabric in solutions of copolymers in methylethylketone and following heat treatment at 140°C. Stability of the superhydrophobic state of polymer coatings is studied during long-term contact with droplets of water and aqueous acidic, alkaline and salt...

... of centrifugal spinning and solution blowing. A series of fibres were prepared by using polyacrylonitrile (Pan), poly(methyl methacrylate) (PMMA) and 50:50 Pan–PMMA polymer solutions without pressure and with 0·2 MPa working pressure. The surface morphology of the nanofibres was analysed by scanning electron...

... on the fiber surface yielding more homogeneous layer morphology. Using broadband UV for the polymerization basically excites radicals in the bulk of the monomer solution as well as at the polymer surface, so both homo- and copolymerization processes can be initiated simultaneously, a decisive factor being...

.... By introducing the conductive polymers, polypyrrole (PPy) and polyaniline (PANi), into the multilayer films structure, their electroactive properties were enhanced. They were also more sensitive for electrochemical detection of hydrogen peroxide. The surface of gold electrodes used in cyclic voltammetry (CV...

.... In order to improve its mechanical properties, UHMWPE was bombarded with 4-MeV He ions to fluence ranging from 10¹² to 5 × 10¹⁴ ions/cm². Changes of surface layer composition produced by ion bombardment of UHMWPE samples were studied. Polymer radiolysis due to the ion...