Article navigation

Wet peroxide oxidation (WPO) and catalytic wet oxidation (CWO) of oily sludge were investigated. Greater than 80% chemical oxygen demand (COD) removal from oily sludge was achieved using sodium carbonate catalysed wet oxidation (WO) under the following conditions using a 0·5 l batch reactor: temperature of 330°C and concentration of sodium carbonate 200 mg/l. Greater than 90% COD removal was achieved using WPO under the following conditions: temperature of 330°C, residence time of 9 min, hydrogen peroxide excess (HE) of 0·8 and initial COD was 20 000 mg/l. Significantly more COD could be removed from oily sludge when HE was 0·8. BOD5/COD ratio was 0·52 after the oily sludge had been treated. It was concluded that WPO was a far more effective pretreatment method for removing organic compounds from oily sludge.

You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Pay-Per-View Access
$39.00
Rental

or Create an Account

Close Modal
Close Modal