... system should be sustainable, economically feasible, environment friendly and socially acceptable. It should be based on economic, technical and environmental assessment along with public participation and stakeholders’ involvement (Soltani et al., 2015). Thus, selection of an appropriate MSW...

... . Clean Technologies and Environmental Policy 17 (3) : 579 – 596 , 10.1007/s10098-014-0841-5 . Çimen Ö (2021) Construction and built environment in circular economy: a comprehensive literature review . Journal of Cleaner Production 305 : 127180 , 10.1016/j.jclepro.2021.127180...

...Rasheeda Khanam; Umesh Maskare; Dundigalla Janaki Laxmi Improper disposal of agri-food processing wastes, including vegetable peels and dairy residues, poses environmental pollution challenges. This study evaluates the potential of onion peels, garlic peels, and molten butter (ghee) residue...

... the work reported in this paper. 28 05 2024 02 06 2025 © 2025 Emerald Publishing Limited 2025 Emerald Publishing Limited Licensed re-use rights only characteristics environment environmental engineering Middle East Arab countries solid waste management waste generation...

...), and flexibility (6.98 ± 0.24%). A biodegradation study, conducted per ASTM D 5988-03, assessed environmental impact by measuring carbon-to-CO₂ conversion in soil over 90 days. All FRS samples showed similar degradation within the first 30 days, with FRS 5 degrading significantly faster thereafter due...

... as factors of the environmental quality state . In Sustainable Production: Novel Trends in Energy, Environment and Material Systems. Studies in Systems, Decision and Control ( Królczyk   G , Wzorek   M , Król   A , et al. (eds)). Springer , Cham, Switzerland , vol. 198 , pp. 91 – 104...

... 2019 (C-19) outbreak in Wuhan (China) . International Journal of Environmental Research and Public Health   17 (5): article 1770, 10.3390/ijerph17051770 . Zambrano-Monserrate   MA , Ruano   MA and Sanchez-Alcalde   L (2020) Indirect effects of COVID-19 on the environment . Science...

... identified that may be a key concern for CMT when utilised in geotechnical applications and environmental point of view. Effect of CMT on the environment is controlled by various parameters such as pH of the specimen, L/S ratio, temperature and so on. Countries such as the USA, Canada, China, South...

...) for further physical examination as per the recommendation the United States Environmental Protection Agency (USEPA, 2002). The collected waste samples were first segregated manually according to their physical nature. The waste samples were shredded to a size smaller than 4 cm to ensure the smooth flow...

... to handle this waste has become an important issue. In recent years, the recycling technology of CDW has developed rapidly and has gradually moved from manual to automated sorting due to the unhealthy working environment and expensive labour costs. The automated sorting technology of CDW can be divided...

... is a more environmentally friendly, sustainable method that eliminates the introduction of toxic chemicals to the environment, reduces handling risks and will reduce the cost of treatment for a business. By using this approach with the onsite biofilter the pH of final effluent discharge reaches 7–8, which...

... for landscape simulation and planning . Landscape and Urban Planning   100 (4): 393 – 395 . Mahini   SA and Gholamalifard   M (2006) Siting MSW landfills with a weighted linear combination methodology in a GIS environment . International Journal of Environmental Science and Technology   3 (4...

...Jennifer Schinkel, MA Each year, approximately one-third of the food produced for human consumption is lost or wasted worldwide. The waste of resources used for this food has significant environmental impacts in terms of land and water use as well as greenhouse gas emissions. Consequently, one...

... the right technologies. In contrast, relatively less attention has focused on strategies for preserving the environment that involves changes in people's behavior’. This paper aims to identify two broad areas of argument around pro-environmental behaviour: how it is developed and how it can...

... digestion and milking frequency as mitigation strategies of the environmental burden in the milk production system . Science of the Total Environment   539 : 450 – 459 , 10.1016/j.scitotenv.2015.09.015 . Blades   L , Morgana   K , Douglas   R , et al. (2017) Circular biogas-based...

... as a percentage of the total weight of the precursor powder material. 12 10 2017 25 04 2018 ICE Publishing: All rights reserved 2018 environment sustainability waste management & disposal There has been a sensational increment in the generation of fly/pond ash in India, due...

...Jeff Cooper, BSc, MSc, FRGS, FCIWM The Courtauld Commitment 2025 sets ambitious targets for food waste prevention and reduction for the UK, enveloped within the overall target for reducing the environmental impacts of food waste by 20% by 2025 compared with that of 2015. In addition...

... as chemical additives in CA mixtures for property enhancement. 28 07 2017 31 01 2018 ICE Publishing: All rights reserved 2018 concrete technology & manufacture environment pollution Coal-based power plants have been a major source of power generation and also a cause...

... of these different waste management options on the environment were assessed in life-cycle perspectives. The results show that the recycling option can be considered environmentally friendly in terms of waste management options. It can be shown to avoid emissions in all of the impact categories except terrestrial...

...Purva Tavri, BSc, MSc This briefing article presents the waste issues and concerns from a broader environmental perspective. In doing so, the briefing demonstrates a significant and complex relationship between environmental solutions and waste management techniques. Shedding light...