– Friction stir welding (FSW) butt-joining involving the use of a dissimilar filler metal insert between the retreating and advancing portions of the workpiece is investigated computationally using a combined Eulerian-Lagrangian (CEL) finite element analysis (FEA). The emphasis of the computational analysis was placed on the understanding of the inter-material mixing and weld-flaw formation during a dissimilar-material FSW process. The paper aims to discuss these issues.
– The FEA employed is of a two-way thermo-mechanical character (i.e. frictional-sliding/plastic-work dissipation was taken to act as a heat source in the energy conservation equation), while temperature is allowed to affect mechanical aspects of the model through temperature-dependent material properties. Within the analysis, the workpiece and the filler-metal insert are treated as different materials within the Eulerian subdomain, while the tool was treated as a conventional Lagrangian subdomain. The use of the CEL formulation within the workpiece insert helped avoid numerical difficulties associated with excessive Lagrangian element distortion.
– The results obtained revealed that, in order to obtain flaw-free FSW joints with properly mixed filler and base materials, process parameters including the location of the tool relative to the centerline of the weld must be selected judiciously.
– To the authors’ knowledge, the present work is the first reported attempt to simulate FSW of dissimilar materials.
