The purpose of this paper is to develop a mathematical model for delamination during drilling by using a response surface methodology (RSM) and also to determine how the input parameters (tool diameter, spindle speed and feed rate) influence the output response (delamination) in machining of fiber metal laminates.
Three factors and a three-level central composite design in RSM are used to carry out the experimental investigation. A video measuring system is used to measure the width of maximum damage of the machined FML composite. The “Design Expert 7.0” is used to analyze the data collected graphically. Analysis of variance is carried out to validate the model and for determining the most significant parameter.
The response surface model is used to predict the input factors influencing the delamination on the machined surfaces of the ARALL composite at different cutting conditions with the chosen range of 95 percent confidence intervals. Analysis of the influences of entire individual input machining parameters on the delamination has been carried out using RSM.
The effect of delamination on drilling of ARALL composites with solid carbide tools of various diameters has not been analyzed yet using RSM.
