When a thick structure is, on the contrary, subjected to moisture absorption, a fairly long time may be needed to reach full saturation. It is, therefore, important to understand and predict the areas of complex composite structures that are more prone to saturation. The material knock-down factors (proportional to the moisture content) may be applied only to these zones, in order to obtain a less pessimistic structural response prediction. The purpose of this paper is to investigate an FE diffusion model that was used to validate the absorption testing results of thick carbon epoxy laminates.
The experimental results were validated by using a diffusion model in Abaqus FE code.
The absorption results of three 15 mm thick carbon epoxy laminates are presented and reproduced via a mass diffusion model. The laminates were conditioned at 70°C and 85 per cent relative humidity in a moisture chamber. Areas more prone to saturation have been predicted by the FE model and the moisture content in the non-saturated areas has been calculated.
The practical implications of the absorption model are discussed on an example of an aero-engine fan blade-like structure.
Validation of thick panels’ absorption data is an important point of novelty of this paper, given the lack of experimental and modelling validation in the open literature.
