The dynamic characteristics prediction and frequency-modulation of pipeline was an important work for the design of aircraft hydraulic structure.
A complex pipeline was deemed as a combination of several segments of straight-pipe-element (SPE). The 3D vibration equations of each SPE were established in their local coordinate system based on Timoshenko-beam model and Euler-beam model, respectively. The dynamic-stiffness-matrixes were deduced from the dispersion relation of these equations. According to the complex pipeline layout in the global coordinate system, a multi dynamic stiffness matrixes assembling (MDSMA) algorithm was carried out to establish the characteristic equations of the whole complex pipeline. The MDSMA solutions were verified to be consistent with experimental results.
The MDSMA method based on Timoshenko-Beam model was more suitable for the short span aviation pipeline and the vibration at high frequency stage (>350 Hz). The layout affected the pipeline's in-plane stiffness and out-plane stiffness, for the Z-shaped pipe, each order natural mode took place on the ZP and NP alternately. Reasonable designs of bending position and bending radius were effective means for complex pipeline frequency-modulation.
A new dynamic modeling method of aircraft complex pipeline was proposed to obtain the influence of pipeline layout parameters on dynamic characteristics.
