Static Indentation Response of H30 Foam ‐ an Experimental and Computational Study

This article presents an approach for assessing the damage resistance of H30 rigid foam subjected to local static loading. The main goal of the experimental part of this paper is to obtain the loaddisplacement response of foam beam specimens under static indentation by steel cylindrical indentors for both loading (indentation) and unloading stages. The instant residual dent magnitude is also measured in the testing. The nonlinear character of the mechanical behavior and the formation of a residual dent (after unloading) are attributed to local crushing of the foam in the zone directly under the indentation area. A visual inspection of a lateral surface of the foam specimens after indentation tests revealed that the local damage underneath the indentor consists of crushed and highly compacted foam, while the rest of the specimen is almost undeformed. A two‐dimensional numerical model is developed to simulate the static indentation response using the ABAQUS computer code. No overall bending of the foam specimens is assumed. The finite element modeling procedure takes into account both physical and geometrical non‐linearities. In order to simulate the plastic part of the response, the model employs the *CRUSHABLE FOAM and *CRUSHABLE FOAM HARDENING options. The modeling procedure is capable of analyzing indentation as well as unloading of foam beam specimens. Thus, the instant residual dent can be predicted. Results generated by this model exhibit good correlation with indentation tests data, thus substantiating its validity.