The purpose of this paper is to develop a mathematical model for surface roughness and delamination through response surface methodology (RSM) and analyse the influences of the entire individual input machining parameters (cutting speed, fibre orientation angle, depth of cut and feed rate) on the responses in milling of glass fibre reinforced plastics (GFRP) composites with solid carbide end mill cutter coated with PCD.
Four factors, five level central composites and a rotatable design matrix in response surface methodology were employed to carry out the experimental investigation. “Design Expert 8.0” software was used for regression and graphical analysis of the data were collected. The optimum values of the selected variables were obtained by solving the regression equation and by analyzing the response surface contour plots. Analysis of variance (ANOVA) was applied to check the validity of the model and for finding the significant parameters.
The developed second order response surface model was used to calculate the surface roughness and delamination of the machined surfaces at different cutting conditions with the chosen range with 95 per cent confidence intervals. Using such a model, remarkable savings in time and cost can be obtained.
The effect of fibre orientation during milling of GFRP laminates using RSM has not been previously attempted for analysis.
