Article navigation
Volume 16, Issue 11
1 November 1987
Pigment & Resin Technology Cover Image for Volume 16, Issue 11
Review Article| November 01 1987

Materials

Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 1758-6941
Print ISSN: 0369-9420
© MCB UP Limited
1987
Pigment & Resin Technology (1987) 16 (11): 19.
https://doi.org/10.1108/eb042419

BP Chemicals has developed Ethoxy propoxypropanol (EDP) as the latest addition to its existing range of propylene glycol ether solvents.

This content is only available via PDF.
© MCB UP Limited
1987
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
122 Views
2 Crossref

New and popular articles

Research on the design of glasses-free 3D decorative effects on the surface of furniture panels
Characteristic peak database of automotive paints for forensic identification: interpretations and applications via FTIR and Raman spectroscopy
Research on improving the rubbing fastness of polyester fabrics based on the film-forming properties of additives
Toward fabrication of sustainable water absorbent hydrogel derived from indigenous rice husk waste via graft copolymerization

Suggested Reading

Preparation and tribological properties of zinc dialkyl(aryl)ethoxy dithiophosphates
Industrial Lubrication and Tribology (June,2012)
Phase separation behavior of three common alcohols with methoxy-nonafluorobutane or ethoxy-nonafluorobutane in water
Journal of Environmental Engineering and Science (November,2013)
Electrochromic and non-volatile bistable resistive switching behaviour of acid-doped poly(triphenylamine ether)s
Pigment & Resin Technology (May,2017)
The effects of titanium dioxide types, resins and additives for optimising universal tinter acceptance
Pigment & Resin Technology (May,1981)
Compacted nanosilica-talc /calcium carbonate polyacrylate composites prepared using accelerated sedimentation
World Journal of Engineering (October,2012)

Related Chapters

Analytical and Experimental Evaluation of Finite Element Models for Crash Analysis
Structures Under Shock and Impact II: Proceedings of the Second International Conference, held in Portsmouth, U.K., 16th–18th June, 1992
5. Impregnation of concrete highway structures
Bridge management 2: inspection, maintenance, assessment and repair
32. Coated particle fuels for the low enriched fuel cycle HTR
Nuclear Fuel Performance

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
CrossRef (2)
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal