Skip to Main Content
Article navigation
Volume 18, Issue 6
1 June 1989
Pigment & Resin Technology Cover Image for Volume 18, Issue 6
Review Article| June 01 1989

Cationic Polymers; An alternative in the formulation of Adhesives and Laquers

Bo Bredenberg
Bo Bredenberg
Becker R&D, Sweden
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 1758-6941
Print ISSN: 0369-9420
© MCB UP Limited
1989
Pigment & Resin Technology (1989) 18 (6): 4–5.
https://doi.org/10.1108/eb042614

In recent years there has been a growing interest in cationic curing or polymerization. So far most of the work has been directed towards radiation curing, but there is a coming interest in heat cured cationic systems as well.

This content is only available via PDF.
© MCB UP Limited
1989
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
112 Views
View Metrics
Development of tranexamic acid-loaded poly(vinyl alcohol) grafted lactide hydrogel film for potential surgical patches
Analysis of mechanical and thermal behaviour of jute/cotton fibre-reinforced polymer hybrid composite after cryogenic ageing
Development and performance improvement of bio-based black pigment for textile printing by upcycling of textile and plant waste
Bio-based cardanol formaldehyde sulfonate: synthesis, characterization and textile application as a dye leveling agent

Suggested Reading

Cationization of Linen Fabric: Studying the Process Parameters
Research Journal of Textile and Apparel (February,2006)
No-Salt Dyeing Behaviour of Cationized Linen Fabrics
Research Journal of Textile and Apparel (May,2006)
Corrosion effects of cations on Aluminium
Anti-Corrosion Manual (April,1991)
Beyond 1,3-difunctionalized imidazolium cations
Nanomaterials and Energy (July,2012)
Preparation of cation exchange filament for 3D membrane print
Rapid Prototyping Journal (July,2020)

Related Chapters

A chemo-mechanical constitutive model accounting for cation exchange in expansive clays
Bio- and Chemo-Mechanical Processes in Geotechnical Engineering: Géotechnique Symposium in Print 2013
24. Condensate purification plant for nuclear systems
Water Chemistry of Nuclear Reactor Systems 2
Paper 101. Laboratory and plant investigations on decomposition products of morpholine in the secondary system of French PWRs
WATER CHEMISTRY OF NUCLEAR REACTOR SYSTEMS 4

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal