Oleochemicals in resin production and usage: Part 2 Available to Purchase

Guanidine stearate will function as a lubricant for melamine/formaldehyde resins (and guanamine/formaldehyde resins), and glyceryl monostearate can improve the mechanical properties of the former. Laurie acid can be applied to the production of high grade baking enemel resins in combination with melamine. Stearic acid can be used in the manufacture of melamine resins, e.g. by reaction with formaldehyde and butanol, to give resins for lacquers, and to yield moulding resins. Sodium myristate is usable as a chain transfer agent in the emulsion polymerisation of methyl methacrylate. Copolymerisation of methacrolein dibutyrate and methyl methacrylate has given resins that can be moulded or used in varnishes, and reaction products of stearic acid with methacrylic acid and neodymium oxide has given transparent optical resins. Cellulose laurate can produce extensibilities of nitrocellulose of the order of 100%, and cetyl acetate can act similarly in film, having little tendency to yellowing, but it has also little stability to exterior exposure. When ethylene glycol monmethyl ether acetyl ricinoleate is incorporated into nitrocellulose as a plasticizer, it gives films that are clear, tough and flexible. Stearic acid can act as a stabilizer for nitrocellulose. Lauryl phosphate has been applied as a catalyst in the modification of olefinic petroleum results, by reaction with acrylic resins, and distearyl pentaerythritol diphosphite can function as a heat stabilizer in petroleum resins.