The objective of this work was to examine the anticorrosive behaviour of four different epoxy coatings, which were formulated with zinc pigments and were applied on pretreated steel panels exposed to deionised/deaerated water taken from the installations of the Greek Public Electricity Company, as well as to compare the results of this study with those of a relevant, previous work. The coating's performance was assessed by the measurement of the potentiodynamic polarisation resistance, by electrochemical impedance spectroscopy and the measurement of dielectric permittivity, during the deionised/deaerated water immersion tests. Additionally, accelerated salt spray tests were performed. All types of coatings tested exhibited a high protective performance. It was concluded that the epoxy system containing zinc dust was the most effective anticorrosion coating under the conditions relevant to this study.
Article navigation
1 April 2003
Research Article|
April 01 2003
Anticorrosion performance of epoxy coatings on steel surface exposed to deionised water
N. Kouloumbi;
N. Kouloumbi
N. Kouloumbi is based at the Department of Materials Science and Engineering, School of Chemical Engineering, National Technical University, Athens, Greece.
Search for other works by this author on:
P. Pantazopoulou;
P. Pantazopoulou
P. Pantazopoulou is based at the Department of Materials Science and Engineering, School of Chemical Engineering, National Technical University, Athens, Greece.
Search for other works by this author on:
P. Moundoulas
P. Moundoulas
P. Moundoulas is based at the Department of Materials Science and Engineering, School of Chemical Engineering, National Technical University, Athens, Greece.
Search for other works by this author on:
Publisher: Emerald Publishing
Online ISSN: 1758-6941
Print ISSN: 0369-9420
© MCB UP Limited
2003
Pigment & Resin Technology (2003) 32 (2): 89–99.
Citation
Kouloumbi N, Pantazopoulou P, Moundoulas P (2003), "Anticorrosion performance of epoxy coatings on steel surface exposed to deionised water". Pigment & Resin Technology, Vol. 32 No. 2 pp. 89–99, doi: https://doi.org/10.1108/03699420310464793
Download citation file:
New and popular articles
Suggested Reading
Preparation and characterisation of zinc yellow pigment for low temperature ceramic glaze – Part I: the effects of the reactants ratio, stirring time and pH
Pigment & Resin Technology (December,2004)
Comparison of the efficiencies of anticorrosive pigments based on chemically modified phosphates
Anti-Corrosion Methods and Materials (October,2002)
Preparation and characterisation of zinc yellow pigment for low temperature ceramic glaze – Part II: the effects of reaction temperature and thermal treatment
Pigment & Resin Technology (June,2005)
Effect of divalent cations in low zinc ambient temperature phosphating bath
Anti-Corrosion Methods and Materials (August,2003)
Electrochemical aspects of protection afforded by finish coat on zinc‐rich primers
Pigment & Resin Technology (December,2001)
Related Chapters
Natural attenuation of mine drainage-borne zinc in shallow subsurface soils over permafrost, central Yukon, Canada
Geoenvironmental Engineering: Geoenvironmental Impact Management: Proceedings of the third conference organized by the British Geotechnical Association and Cardiff School of Engineering, Cardiff University, and held in Edinburgh on 17–19 September 2001
IMPROVING EFFICIENCY IN THE GALVANIC CATHODIC PROTECTION OF CONCRETE STRUCTURES
Repair and Renovation of Concrete Structures: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 5–6 My 2005
SITE APPLICATIONS OF SELF COMPACTING AND PIGMENTED CONCRETE
Innovations and Developments In Concrete Materials And Construction: Proceedings of the International Conference held at the University of Dundee, Scotland, UK on 9–11 September 2002
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
