Oligomer (semicarbaside‐phethalic acid) and its complexes with Fe(III), Co(II) and UO2(II) chloride were prepared and characterised using elemental analysis, spectral (1H NMR, infrared and UV‐Vis) and magnetic measurements. Extensive studies suggested that the Fe(III), Co(II), and UO2(II) oligomer complexes were octahedral dimers. Thermal analyses (thermal gravitational analysis (TGA) and differential thermal analysis (DTA)) of the complexes were carried out and the relevant activation energies were calculated. The effect of the oligomer on the corrosion of iron metal in acidic media (2 M H2SO4) was studied. It was found that the oligomer inhibited the corrosion of iron metal in acid media. The corrosion inhibition efficiency of these compounds was calculated based on weight loss and potentiostatic measurements.
Article navigation
1 February 2004
Research Article|
February 01 2004
Molecular characterisation and corrosion studies of oligomer‐transition metals complexes
S.A. Al‐Thabaiti;
S.A. Al‐Thabaiti
Department of Chemistry, Faculty of Science, King Abdulaziz University, Jaddah, Saudi Arabia
Search for other works by this author on:
F.M. Al‐Nowaiser
F.M. Al‐Nowaiser
Department of Chemistry, Faculty of Science, King Abdulaziz University, Jaddah, Saudi Arabia
Search for other works by this author on:
Publisher: Emerald Publishing
Online ISSN: 1758-6941
Print ISSN: 0369-9420
© Emerald Group Publishing Limited
2004
Pigment & Resin Technology (2004) 33 (1): 15–20.
Citation
Al‐Thabaiti S, Al‐Nowaiser F (2004), "Molecular characterisation and corrosion studies of oligomer‐transition metals complexes". Pigment & Resin Technology, Vol. 33 No. 1 pp. 15–20, doi: https://doi.org/10.1108/03699420410512059
Download citation file:
New and popular articles
Suggested Reading
Effect of ENIG deposition on the failure mechanisms of thermomechanically loaded lead‐free 2nd level interconnections in LTCC/PWB assemblies
Soldering & Surface Mount Technology (June,2010)
Thermistors – in search of new applications, manufacturers cultivate advanced NTC techniques
Sensor Review (December,2002)
The performance of VPI‐coated paper for temporary corrosion prevention of metals
Anti-Corrosion Methods and Materials (October,2002)
Gum arabic as a potential corrosion inhibitor for aluminium in alkaline medium and its adsorption characteristics
Anti-Corrosion Methods and Materials (September,2006)
Corrosion inhibition and adsorption behaviour of Ocimum basilicum extract on aluminium
Pigment & Resin Technology (March,2006)
Related Chapters
Other processes
Basic Water Treatment
Disinfection
Basic Water Treatment
Introduction to polymers and polymer fluids
Polymer Support Fluids in Civil Engineering
Recommended for you
These recommendations are informed by your reading behaviors and indicated interests.
