The purpose of this study was to overcome discomfort associated with it, a resin finish was applied in conjunction with hydrophilic polyurethane.
The process variables included concentrations of polyurethane and resin finishes, and pH under central composite design (CCD). The fabric specimens were assessed for crease recovery angle (CRA), tensile strength and moisture management properties.
Some models were developed for prediction of CRA and overall moisture management capability (OMMC) of treated fabric. It was observed that polyurethane concentration showed a parabolic relationship with CRA and a direct relationship with OMMC, whereas resin concentration showed a parabolic relationship with CRA and an inverse relationship with OMMC. Increase in pH from acidic to alkaline resulted in a decrease in CRA but an increase in OMMC. The untreated specimen had the highest tensile strength, whereas the specimen treated with polyurethane showed the least tensile strength loss, and the one treated with resin showed the highest loss in tensile strength.
As the polyurethane-based finish is soft and hydrophilic, so it was expected that it would overcome the uncomfortable feature of durable press finish, and with its flexibility, the strength losses might reduce.
This is the first report about the investigation of effects of increasing flexibility of the cross-link by incorporating polyurethane compounds into a typical dimethylol dihydroxy ethylene urea durable press resin formulation.
