Epoxy (EP) and polye-caprolactone (PCL) are typical dual-shape memory polymer (DSMP). To get excellent triple-shape memory effect (TSME) polymer composites which are made from EP and PCL. Miscible PCL/EP blend composites have been investigated and compared to the TSMEs with electrospun PCL microfiber membranes/EP composites. Clay montmorillonite (MMT)-modified electrospun PCL microfiber membranes were prepared to improve the shape memory fixities of electrospun PCL microfiber membranes/EP composites.
The morphologies of electrospun PCL microfiber membranes and the cross section of PCL/EP composites were studied using a field emission scanning electron microscope (FE-SEM), and the existence of MMT was confirmed by a transmission electron microscope. Thermal mechanical properties were observed by a differential scanning calorimeter (DSC) and a dynamic thermomechanical analysis machine, and the TSMEs were also determined through dynamic mechanical analysis.
Results indicate that the TSMEs of electrospun PCL microfiber membranes/EP composites were excellent, whereas the TSMEs of PCL/EP blend composites were poor. The TSMEs of PCL electrospun microfiber membranes/EP composites significantly improved with the addition of the PCL electrospun microfiber modified with moderate MMT.
Adding a moderate content of MMT into the electrospun PCL fibers, could improve the TSME of the PCL fiber membranes/EP composites. This study was to create a simple and effective method that can be applied to improve the performance of other SMP.
A novel triple-shape memory composite were made from dual-shape memory EP and electrospun PCL fiber membranes.
