The dyeing of cellulosic and proteinous fibers with natural and synthetic colorants usually needs large amounts of metal salts to promote the dyeing procedure. To get rid of the necessity to use metal salts, plasma treatment and subsequent attachment of chitosan biopolymer were considered as green processes for surface functionalization of wool and cotton. The purpose of this paper is to investigate the effect of oxygen plasma treatment and attachment of chitosan on the dyeability of wool and cotton fabrics using walnut and weld as model natural dyes, as well as C.I. reactive blue 50 and C.I. acid blue 92 as model synthetic dyes.
Wool and cotton fabrics were modified with oxygen plasma and coated with chitosan solution. The un-modified and modified samples were dyed with the above-mentioned dyes under constant conditions. The color strength, color coordinates and fastness properties of the dyed samples were determined and compared.
The results showed that oxygen plasma treatment could improve the dyeability and fastness properties of wool and cotton fibers when dyed with all of the above-mentioned dyes. Attachment of chitosan to the plasma-treated samples significantly improved the dyeability of wool and cotton fibers with walnut, acid and reactive dyes. The fastness properties of the dyed samples were enhanced by plasma treatment and chitosan coating.
This study uses plasma treatment as an environmentally friendly pre-treatment for attachment of chitosan on wool and cotton. This process improved the dyeing properties of both fibers. The use of metal salts in not needed for dyeing of wool and cotton according to the investigated process.
