This paper aims to study the effect of elevated temperature on the compression behaviour of carbon fibre polyphenylene sulphide (CF/PPS) laminates notched and unnotched specimens made by film stacking method (FSM).
The surface of CF was coated with a silane coupling agent to form an effective transition layer with PPS, so as to enhance the interfacial interaction between CF and PPS. Considering the influence of fabrication pressure, forming temperature and cooling rate on the properties of laminates to obtain a reasonable preparation process. Conducting a compressive experiment of notched and unnotched specimens at different temperatures, which failure modes were examined by scanning electron microscope and stereo microscope.
The experimental observations highlight that with the increase of temperature, the transition failure mode from fibre broken to kink-band appeared in unnotched specimens, which were closely attributed to the matrix state. The notched specimens appeared more complex failure mode, which can be attributed to the joint effect of temperature and opening hole.
A simple way of FSM for composite material laminates has been developed by using woven CF and PPS films.
The outcome of this study will help to understand the compression response mechanism of composite materials made by FSM at different temperature.
