Skip to Main Content
Article navigation
Purpose

Natural colorants are believed to be safe because of their nontoxic, noncarcinogenic and biodegradable nature, and also, the demand for natural dyes is steadily increasing. This study aims to investigate the dyeing of polyethylene terephthalate (PET) fabrics under cold plasma and ultraviolet (UV) radiation conditions with Prangos ferulacea.

Design/methodology/approach

In the first, some PET fabrics were modified using UV radiation and some others by cold plasma (oxygen/argon), and then the dyeing of fabrics with the natural dye was done (100°C/130°C) without using metallic mordant. Dyeability (color strengths) of the treated samples, colorfastness to washing, light and rubbing, water absorption time, crease recovery angle, air permeability and mechanical behavior were investigated.

Findings

The maximum color strength (k/s = 4.87) was achieved for the fabric exposed to UV radiation for 2 h and then dyed with Prangos ferulacea at 130 °C. The results indicated that the dyed fabric showed acceptable colorfastness (very good–excellent) properties in washing and rubbing fastness except for colorfastness to light (moderate). The strength and the angle of crease recovery of treated and dyed samples have increased, while the time of water absorption and air permeability have decreased.

Originality/value

The surface modification of PET (UV radiation and plasma treatment) provides a new idea to improve the dyeability of PET with Prangos ferulacea natural dye without using metallic mordant.

Licensed re-use rights only
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$41.00
Rental

or Create an Account

Close Modal
Close Modal