The study aims to compare and analyze the impact of the commonly used pallets (wooden pallet and plastic pallets), using life cycle assessment (LCA), then provide certain suggestions for the development of green packaging.
In this study, software Simapro was used to calculate and analyze the whole life cycle of pallets from the stage of raw materials and production to processing and waste disposal.
A total of 12 environmental categories were used to quantitatively analyze the environmental impact of the four different pallets. The results showed that, regardless of raw material, processing, or waste stage, the environmental impact of wooden pallet was lower than that of plastic pallet. Wooden pallet was better than plastic pallets.
This study compared and analyzed the pallet of 1 × 1.2m with different materials.
Green packaging is the development trend of the future packaging, which follows the principle of 3R1D. According to the calculation results, corresponding suggestions can be put forward from production, processing, using, wasting and other aspects, and make corresponding contributions to the development of green packaging.
The contribution and impact of each stage of the product on the environment can be studied. The environmental impact, such as global warming potential, water scarcity, can be reduced through different solutions such as the use of green materials, good processing techniques and higher recycling rates.
