Draeger gas detection assists with DSEAR
Draeger gas detection assists with DSEAR
Keywords: Environmental health and safety, Hazardous materials
Far reaching and diverse in application, the Dangerous Substances and Explosive Atmospheres Regulations (DSEAR) are applicable to employers as well as the self-employed. Currently being enforced by the HSE, they affect a wide range of businesses from petrol forecourts selling LPG and garages using oxy-acetylene, through to the utilities where explosive gases such as methane may be generated.
Repealing much of the previous legislation relating to flammable substances and dusts, DSEAR relates to risks from fire, explosion and “similar events”arising from dangerous substances that are used or present in the workplace. A detailed definition is provided within the regulations but, in broad terms,dangerous substances cover petrol, LPG, paints, varnishes, solvents and dusts which, when mixed with air, could cause an explosive atmosphere.
As dangerous substances can be found in varying degrees in most workplaces,DSEAR is likely to affect most industries. Similarly, explosive atmospheres are also fairly common and contain an accumulation of gas, mist, dust or vapour which, when mixed with air, has the potential to catch fire or explode. Although an explosion may not occur, there is still the risk that, if the atmosphere was to ignite, the rapid spread of flames or rise in pressure could cause an explosion – particularly in a confined space within plant or equipment such as vats or cylinders.
Similar in outline to the Control of Substances Hazardous to Health (CoSHH)Regulations, the main requirements of DSEAR are that all employers and the self-employed must:
carry out a risk assessment of any work activities involving dangerous substances;
provide measures to eliminate or reduce risks as far as is reasonably practicable;
provide equipment and procedures to deal with accidents and emergencies;
provide information and training to employees; and
classify places where explosive atmospheres may occur into zones, and mark the zones where necessary.
Clarifying the existing requirements to manage fire and explosion risks,which are set out in the Management of Health and Safety at Work Regulations,1999, DSEAR also expands those requirements in a number of areas.
For instance, unless a detailed assessment of the risks from fire, explosion and other events arising from dangerous substances has already been carried out under the Management Regulations, DSEAR requires a risk assessment to be carried out now. In addition to addressing the requirements specified by DSEAR, the assessment should be reviewed regularly and further assessments should be carried out before starting any new work or before making modifications to existing plant or processes, including a difference substance or formulation.
All maintenance work and other non- routine tasks should be assessed as well as normal activities, regardless of the quantity of dangerous substance present(this has an added benefit in that it will determine the effectiveness of control measures or precautions already in use). Organisations with more than five employees must also record the findings in accordance with the regulations.
The risk assessment should include the hazardous properties of the substance,the way they are used or stored, the possibility of hazardous explosive atmospheres occurring and cover all potential ignition sources.
The main aim is to ensure that the safety risks from dangerous substances are eliminated or, where this is not reasonably practicable, to take measures to control risks and to reduce the harmful effects of any fire, explosion, etc. Substitution is the best solution but is not always possible. Where risk cannot be entirely eliminated, control and mitigation measures are required.
Control measures include ventilation, avoiding ignition sources, and keeping incompatible substances apart. Mitigation measures should be used to prevent fires and explosions from spreading, reduce the number of employees exposed and,in the case of process plant, provide plant and equipment that can safely contain or suppress an explosion, or vent the substance to a safe place. The design, construction and maintenance of the workplace and work processes,including all relevant plant, equipment, control and protection systems should be included.
In addition, workplaces where explosive atmospheres may occur must be classified into zones based on their likelihood and persistence.
These areas must also be protected from sources of ignition by selecting equipment and protective systems meeting the Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations, 1996. These zones should also be marked “EX” and be verified as being safe by a person or organisation competent in the field of explosion protection. All personnel working in these areas must be provided with appropriate personal protective equipment (PPE) and clothing that does not create a risk of electrostatic discharge igniting the explosive atmosphere.
These additional requirements come into effect at different times. Workplaces in use before July 2003 must meet the requirements by July 2006. Those that were in use before July 2003 but are modified before July 2006 must comply from the date of the modification, and those that become operational after 30 June 2003 must meet them from the date they come into use.
Training, instruction and the provision of information form an essential part of DSEAR and should be given to employees and other people at the workplace who may be at risk. All non-employees whose safety may be affected should receive information in proportion to the level and type of risk.
Building on the Management Regulations, DSEAR also requires that, should the assessment indicate that an accident, incident or emergency could occur because of the quantity of dangerous substances at the workplace, employers provide suitable warning (including visual and audible alarms) and communication systems, as well as escape facilities, emergency procedures, PPE for essential personnel dealing with the incident, and practice drills.
