... (Nascimento et al., 2022). Eid (2022) reported that adding nanoparticles to a polymer can change FTIR results. FTIR spectroscopy may discover structural variations in the molecular binding between entities and provide information on their interactions by detecting changes in the vibration...

... 2023 © Emerald Publishing Limited 2023 Emerald Publishing Limited Licensed re-use rights only Ceramic pigments Blast-furnace slag Diopside X-ray phase analysis FTIR spectroscopy Mineralogical composition Colour indices The addition of NiO into the composition of diopside...

... Antioxidants SEM RSM FTIR spectroscopy Anthocyanins Total phenol content The extract obtained from the optimized condition was subjected to vacuum rotary evaporation (EYELA OSB-2100) at 35°C to remove the solvent and obtain concentrated extract of 45 per cent Brix. The Brix of the concentrated...

... (SEM), transmittance electron microscope (TEM), Fourier transformer infrared (FTIR) spectroscopy and particle size analyzer. The latter were incorporated in cross-linking formulation of cotton fabrics encompassing different concentrations of citric acid and sodium hypophosphite at different curing time...

... of organic compound such as cellulose, frequently present in a typical indoor paint as thickener, contributes to feed microorganisms (Garg et al., 1995). Bacteria FTIR spectroscopy Microorganisms Biocides Coating biodeterioration Vegetables extracts Antimicrobial paints Biofilm...

.../min at 35°C. Sample injection volume was 50.0 μL. © Emerald Publishing Limited 2017 Emerald Publishing Limited Licensed re-use rights only Chemical properties Coating Epoxy resins FTIR spectroscopy Synthesis Natural resources The comparison between JO, EJO...

... Publishing Limited 2016 Emerald Group Publishing Limited Licensed re-use rights only Pigments FTIR spectroscopy Coatings technology Forensics Confocal Raman microscope Figure 2 IR spectra of two blue paint samples It is estimated that more than 90 per cent of coating samples...

... 0.1 N AgNO₃ solution. The products were then dried in an air oven at 90°C, ground and sieved through 230 nm mesh size, then stored in vacuum desiccators. Composites Chemical analysis and testing Mechanical properties FTIR spectroscopy Thermal analysis Curing Fillers...

... for developing coating material for metal surfaces. © Emerald Group Publishing Limited 2014 Coating FTIR spectroscopy Blends Epoxidised-novolac resin Lac resin Shellac is the commercial form of natural resin lac, secreted by tiny insects called Kerria lacca (Kerr.). Shellac...

.... Polyurethanes Temperature Dispersions FTIR spectroscopy Thermal analysis A four-neck flask equipped with a mechanical stirrer, dropping funnel, thermometer and dry nitrogen blanket was charged with aqueous sodium bisulphite (30 weight per cent) and various additives. The polyurethane...

...‐oxidative aging at 150°C for various times (up to 1,000 h) were investigated by scanning electron microscopy (SEM) for fracture morphology, Fourier transform infrared (FTIR) spectroscopy for chemical structures, and flexural strength test and inter‐laminar shear strength (ILSS) test for mechanical...