...., 2021). The objective of this work is to develop and evaluate radiation-curable GMA/Styrene coating systems reinforced with nanoclay and to investigate the influence of gamma irradiation dose on their structural, chemical and mechanical properties. By systematically varying the gamma irradiation...

... concentrations on the mechanical properties, including tensile strength, flexural strength and hardness. Design/methodology/approach Composites were fabricated using a Digital Light Processing ( DLP ) system. Mechanical characterization was performed through Shore-D hardness, tensile and three-point bending...

... conductivity Mechanical properties Owing to the unique properties of polymer nanocomposites such as special mechanical, optical, electrical and magnetic properties, the materials science community has grown more and more interested in them over the past ten years (Elmesallamy et al., 2022...

...Heba Raslan; Khaled El-Nemr; Magdy Ali; Medhat Hassan Purpose This study aims to investigate the influences of polyester fabric layers on the mechanical properties of SBR and devulcanized waste rubber composite materials, as well as the effect of gamma irradiation dose. Design/methodology...

... addressed upcoming difficulties and emphasized important industrial uses. Zengguang et al. (2019) reviewed the functional expansion of the PLA components as well as the interface bonding property, mechanical properties and form accuracy promotion of the FDM 3D-printed PLA parts. For open source...

... a * ) 2 +   ( Δ b * ) 2 ] ½ Denim Polymer dispersion Self-cleaning Thermal properties Mechanical properties Denim is a popular fabric type used from the 18th century until today. While traditional denim is a warp yarn-dyed, rigid woven fabric, today it can also...

... and 6 . Figure 5 Impact for volume fraction on load–extension curve CGDP N₂ 80 W (0.5 h)-treated SFREC Figure 6 Impact for volume fraction on load–extension curve CGDP N₂ 120 W (0.5 h)-treated SFREC Adhesion Cold plasma treatment Mechanical properties...

...Kawaljit Singh Randhawa Purpose The purpose of this study is to look into the hygroscopic and tribo-mechanical properties of a polypropylene/polyamide-6 (PP/PA6) blend and a PP/PA6/Boron sesquioxide composite. Design/methodology/approach The hygroscopic behaviour of the PP/PA6 blend and PP/PA6...

... large surface area with various polar groups and can be processed easily. Design/methodology/approach This study is carried out to investigate the effect of partial replacement of silica (as traditional filler) by naturally occurring pumice powder to improve the thermal and mechanical properties...

... surface. The WCA of prepared superhydrophilic poly(N-hydroxyethyl acrylamide) coating was 5° (Meng et al., 2022). The calcination process at high temperature is required to strengthen the mechanical property of nanocoatings. The prepared graphite-C₃N₄ coating maintained its...

... spectroscopy (FTIR), digital microscope, scanning electron microscope (SEM), change of color and mechanical properties. Findings The characteristic FTIR bands showed the effect of accelerated heat aging on the molecular structure of the studied samples, but treated and aged treated samples used were better...

... . 28 01 2022 27 03 2022 16 05 2022 21 06 2022 26 06 2022 © 2022 Emerald Publishing Limited 2022 Emerald Publishing Limited Licensed re-use rights only Polymers Epoxy resin Phosphorus–nitrogen synergism Flame retardant Mechanical properties As one...

... of this study is to obtain a green and degradable shape memory material, calcium alginate (Ca-Alg) film was prepared and the mechanical properties, the shape memory effect of the film were investigated and confirmed. Design/methodology/approach The Ca-Alg films were prepared by Na-Alg, calcium chloride...

...., 1999 ; Varkey et al., 2000 ; Cowie et al., 2003 ; Zulkepli and Ismail, 2012 ; Noriman and Ismail, 2013). However, the effect of different compatibilizer loading on thermomechanical and mechanical properties of ternary rubber filled with CB has not been reported. These research...

... Munaikadu, Mandapam region, Ramanathapuram district, Tamil Nadu. Design/methodology/approach Biodegradable film was developed by using carrageenan extracted by using alcohol extraction method. To improve the mechanical properties of the film, rice starch was incorporated. The biodegradable films were...

... to provide a deeper understanding of filling materials characterization, dimensional stability, their shrinkage and study mechanical properties. Findings The analytical study of filling gaps in wooden objects with different filling materials allowed defining that the main drawbacks of the examined gap...

...  − 2 . 1 0 BC − 6 . 73A ²   − 7 . 28B ²  MPa © Emerald Publishing Limited 2022 Emerald Publishing Limited Licensed re-use rights only Lagenaria siceraria Alkali treatment Natural fibers Epoxy matrix Optimization Mechanical properties Optimization...

... of the thermograms obtained as follows: 21 11 2020 17 01 2021 09 03 2021 © Emerald Publishing Limited 2021 Emerald Publishing Limited Licensed re-use rights only Linear low-density polyethylene Corn starch Essential oils Mechanical properties Polyethylene is one...

... at: zxrhrbust@163.com 02 04 2021 10 06 2021 20 06 2021 © Emerald Publishing Limited 2021 Emerald Publishing Limited Licensed re-use rights only Mechanical properties Dielectric properties Thermal properties Hyperbranched Polyimide Phenolic epoxy vinyl ester resin...

... microscope (SEM) of the filler and microstructure and mechanical properties of the composite were characterized to the better reinforcement. Findings POP-MMT and OTAC-MMT enhanced BMI-cured products’ toughness by generating microcracks in the polymer to absorb more fracture energy. Meanwhile, POP-MMT...