... Metals Plasma Water Among plasma-chemical discharges, contact non-equilibrium low-temperature plasma (CNP) is a promising option from the point of view of practical application (Pivovarov et al., 2015). Plasma discharge is generated between the electrode in the gaseous phase...

... produces a real-time evaluation of the anti-corrosive nature of the coating under natural conditions rather than using an accelerated laboratory test. Practical implications – It may be useful for other metal industry like aluminium. The work can be used as a guiding chemistry for development...

... for the inhibition process and also to analyse the local reactivity of the molecule. Findings – HPMC inhibited aluminium corrosion in the acidic environment. The inhibition efficiency was found to depend on concentration of the inhibitor. Impedance results reveal that HPMC is adsorbed on the corroding metal...

... of aluminium pigments was novel and could find numerous applications in surface coatings and adhesives. P.H. Pi can be contacted at: phpi@scut.edu.cn Aluminium pigments have been widely applied in the fields of paints, inks and plastics industries for many years due to their special metallic...

... implications Ethanol extract of GL can be used as an environmentally friendly inhibitor for the corrosion of mild steel in H₂SO₄. Originality/value This environmentally friendly inhibitor could find possible applications in metal surface anodising and surface coatings. © Emerald...

...A. Srivastava; D. Agarwal; S. Mistry; J. Singh Purpose The purpose of this paper is to synthesise environment friendly UV curable polyurethane acrylate resins for various industrial applications and study the performance properties of the cured coating films applied over metal surfaces. Design...

... (52.8), 248 (17.0), 238 (10.3), 178 (35.0), 185 (7.8) and 136 (32.0). Metals Ecology Aquatic biology Copper pollutants The anti‐fouling agent tributyltin (TBTO) has been extensively used in the marine environment. Previous studies of the effects of TBTO on marine organisms have shown...

... of halides in acidic medium. This environmentally friendly inhibitor could find possible applications in metal surface anodizing and surface coatings. The volume of test solution was kept as 100 ml for gasometric (hydrogen evolution) technique. The progress of the corrosion reaction was monitored...

... aluminium corrosion in the acidic and alkaline environments. Inhibition efficiency increased with extract concentration but decreased with rise in temperature, suggesting physical adsorption of the organic matter on the metal surface. These results were corroborated by kinetic and activation parameters...

... of preparation could be used to produce fibres, films and monoliths. Originality/value The magnesium ferrite pigments prepared could be use in numerous paints for steel protection. © Emerald Group Publishing Limited 2005 Particle size measurement Metals Pigments Ferrite pigments have...

... not only in paint formulations, but also in rubber and plastic composites as reinforcing fillers. © Emerald Group Publishing Limited 2005 Pigments Oxides Metals Paints Corrosion protection Organic coatings are effectively used for the protection of metals due to their capacity to act...

... of the oligomer on the corrosion of iron metal in acidic media (2 M H₂SO₄) was studied. It was found that the oligomer inhibited the corrosion of iron metal in acid media. The corrosion inhibition efficiency of these compounds was calculated based on weight loss and potentiostatic...

... was important to the adhesion strength of conductor film. In order to achieve good adhesion, it is necessary that the glass has a proper softening point (about 500‐650°C). © MCB UP Limited 2003 Thick film Metals Conductors Figure 5 The SEM cross‐section photo and EDS element...

... © MCB UP Limited 2002 --> Painting Metals Tape automated bonding 3M VHB tape bonds metal prior to painting Keywords: Painting, Metals, Tape automated bonding A new line of 3M- VHB- Tapes can replace spot-welding in many metal assembly applications prior to most...

... plate right down to the bare metal. Tests performed on an Abcite coated steel plate exposed to 5 per cent salt water at 35°C (ASTM B117‐B73, DIN 53167/50 021‐SS), showed that corrosion creep was less than 2mm after 2,000 hours and that no corrosion occurred after 2,000 hours of exposure to condensation...